Opis

LR-K003 PLC Igłowy tester płomienia

The reference standard

IEC 884-1, GB2099.1, VDE, IEC335, GB4706.1, GB5169.5, UL1694.

Specyfikacja techniczna

This product according to used in electronic, electrical products due to fault conditions, such as through the leak path of fault current, components or parts of overheating, such as bad contact also may cause fire, it may be shot into the nearby on the part of the test is simulation under fault conditions inside the product produced by the small flame, simulation technology is used to evaluate the fire risk.For small parts (or components) hot wire test or horizontal – vertical combustion test method is not suitable, can cite needle flame test method.If the sample is ignited during the hot wire test, a needle flame test is required for the combustion hazard.Suitable for electronic electrical products, sprzęt AGD, składniki, Jak na przykład: terminal, centrifugal switch, electric rice cooker socket.

LR-K003 PLC Igłowy tester płomienia

Podstawowe specyfikacje

1) zawartość pudełka: 0.5 metr sześcienny, ze szklanymi drzwiami obserwacyjnymi

2) fuel: butane gas

3) burner specification: więcej niż 35 mm długości, inner Ø + / – 0.1 mm, 0.5 mm outside diameter less than 0.9 mm Ø

4) wysokość płomienia: 12mm + 1mm can be adjusted

5) flame temperature: 100 ℃ to 700 ℃ wewnątrz 23.5 + / – 1 S

6) regulator czasowy: adjustable in the range of 0 ~ 99 minuty i 99 sekundy, the burning time can be set, and the burning duration can be recorded

7) cechy produktu: the combustion box and main mechanical parts of this test instrument are stainless steel, beautiful appearance, smoke resistance and air corrosion.The time figures show that the jig can be adjusted in three dimensions, the control system is automated and the independent sniffle, and the observation record is convenient and reliable.With temperature measuring device.

8) zasilacz: AC220V / 50Hz