LR-STA200 Synchroniczny analizator termiczny
- Opis
- Zapytanie
Opis
LR-STA200 Synchroniczny analizator termiczny
Synchronous thermal analysis combines thermogravimetric analysis TG with differential thermal analysis DTA or differential scanning calorimetry DSC. The information of TG and DTA or DSC can be obtained synchronously by using the same sample in the same measurement.
The following properties of the materials are measured and studied:
DSC: topienie, krystalizacja, phase transformation, temperatura reakcji i ciepło reakcji;
TG: stabilność termiczna, decomposition, REDOX, adsorpcja i desorpcja, free water and crystal water content, composition ratio calculation, itp
LR-STA200 Synchroniczny analizator termiczny
Structural Advantages:
1. The furnace body is heated by double row winding of precious metal wire, which reduces interference and is more resistant to high temperature.
2 Tray sensor, using ceramic rod as the connecting rod, with high temperature resistance, odporność na utlenianie, corrosion resistance and other advantages.
3. The power supply and circulation heat dissipation parts are separated from the main engine to reduce the influence of heat and vibration on the micro thermal balance.
4. Open cover structure, łatwy w obsłudze.
5. The host adopts heat insulation device to isolate the heat influence of heating furnace body on the chassis and micro thermal balance.
6. The furnace body can be replaced according to customer requirements
Advantages of controller and software:
1. Independent AD acquisition circuit, sampling speed, fast processing speed, you can set different sampling rates.
2. Signal acquisition circuit can collect TG signal and temperature T signal at the same time.
3. Double layer heat insulation is adopted at the bottom of the furnace body to avoid the influence of thermal radiation on the weighing system
4. USB two-way communication is adopted between the software and the instrument to fully realize remote operation. The parameters of the instrument can be set and the operation of the instrument can be stopped by computer software.
5.7 inch full color 24bit touch screen, better man-machine interface. TG calibration can be achieved on the touch screen
LR-STA200 Synchroniczny analizator termiczny
parametry techniczne:
Dz-sta200 synchronous thermal analyzer
1. Zakres temperatury: room temperature ~1200 ° C
2. Rozdzielczość temperaturowa: 0.01℃
3. Wahania temperatury: ± 0,1 ℃
4. Szybkość ogrzewania: 0.1~100℃/min
5. Tryb kontroli temperatury: ogrzewanie, stała temperatura
6 constant temperature time: 0 ~ 300min arbitrary setting (can be extended 72h)
7 czas chłodzenia: ≤15min(1000℃~100℃)
8 balance measurement range: 0.1mg ~ 2G can be extended to 5G
9. Accuracy of TG: 0.01mg
10. Resolution of TG: 0.1ug
11.Zakres DSC: 0 ~ ±1000mW
12 Rozdzielczość DSC: 0.1UW
13. Dokładność: 0.01MW
14. Tryb wyświetlania: 24trochę koloru, 7 “Wyświetlacz dotykowy LCD
15. Atmosphere device: built-in gas flow meter, including two gas switching and flow size control
Atmosphere: inert, oxidizing, reducing, static, dynamic
16. Oprogramowanie: Intelligent software, which can process the data of TG, DTG and TG-DSC curves, export EXECL, generate PDF report and print experimental reports
17. Interfejs danych: standardowy interfejs USB
18. Zasilacz: AC220V 50Hz
19 crucible type: ceramic crucible, aluminum crucible
20. Oprogramowanie: temperatura, enthalpy multi point correction, meet the different temperature section of the sample test