3671C High Frequency network analyzer vector network analyzer

1. Product Overview

3671 series vector network analyzer products include 3671C (100kHz~ 14GHz), 3671D (100kHz~ 20GHz), 3671E (100kHz~ 26.5GHz), 3671G (10MHz~ 43.5GHz) o 3671 series vector network analyzer provides frequency response, single port, response isolation, enhanced response, full dual port, electrical calibration and other calibration methods, built-in logarithmic amplitude, linear amplitude, standing wave, phase, group time extension, Smith circle chart, polar coordinates and other display formats. Equipped with USB, LAN, GPIB, VGA, HDMI and other standard interfaces, it can accurately measure the amplituary-frequency characteristics, phase-frequency characteristics and group delay characteristics of microwave networks. 3671 series vector network analyzer retains the characteristics of high-end vector network analyzer, including performance indicators, instrument appearance, display effect, software interface, at the same time control instrument volume, weight, wind noise, for users to create a good use of the experience. The product can be widely used in radar, communication, navigation and other fields, is the national defense, university and industrial scientific research, batch production in the process of indispensable testing equipment.

3671C High Frequency network analyzer vector network analyzer

2.Main Features

• Wider frequency coverage, starting frequency as low as 100kHz

• More selectable band width, maximum IF bandwidth up to 30MHz

• Advanced calibration technology, vivid wizard calibration, flexible calibration types, Compatible with a variety of calibration components

• A variety of display formats such as logarithmic/linear amplitude, standing wave ratio, group delay, Smith chart and pole position markers

• Chinese/English operation interface, 12.1-inch 1280*800 high-resolution multi-touch display

• Record/run, one-button operation simplifies the measurement setting steps

• Advanced time domain options add TDR impedance measurement, eye map analysis, intuitive and easy to use

3671C High Frequency network analyzer vector network analyzer

Multiple windows display all measurement channels

The analyzer supports up to 64 channels and displays up to 32 measuring windows simultaneously, with up to 16 traced curves displayed in each window at the same time, allowing more visual observation and more convenient operation.

3671C High Frequency network analyzer vector network analyzer

Rich peripheral interfaces, flexible and practical

3672*-S Series realize the perfect combination of the instrument and PC through the hardware and software platform consisting of embedded computer module which is compatible with PC and Windows operation system. The users can use the rich I/O interface (including GPIB, USB, LAN) to realize the optimum selection of data communication.

The 3671 series vector network analyzer can scan up to 43ms (typical value) under the condition of full frequency 201 point scan and 600kHz IF bandwidth, and provides one-click scan time test function for easy evaluation.

Calibration type is flexible and optional, compatible with a variety of calibration parts

3671 series vector network analyzer provides a variety of calibration types, such as wizard calibration (automatic calibration), non-wizard calibration (through response calibration using mechanical calibration parts, through response and isolation calibration, single port calibration, enhanced response calibration, full two-port SOLT calibration, TRL calibration), electric calibration (ECal), etc., which can be selected according to the actual test needs Shaft mechanical calibration parts, electrical, sub-calibration parts and other calibration parts, convenient for different interface types of device testing.

Recording function to achieve one – click automated testing

Record all the operating steps in the process of using the instrument, and can be inserted at any time to edit the prompt dialog box, and pop-up prompt dialog box on time, waiting for confirmation, interactive function, truly realize the one-click automation function of intelligent instrument.

Time domain analysis (optional)

3671 series vector network analyzer can realize the switch between the frequency domain and the time domain of the measurement results by configuring the time domain measurement optional, to determine the location of the discontinuous points in the device, fixture or cable, to achieve accurate fault location.

3671 series vector network analyzer provides virtual eye image generation and analysis function based on S parameter. The simulation code output unit is used to generate data bits with changes of 0 and 1, and the time domain impulse response of the simulation code pattern and the tested part is convolved, and the virtual eye map is obtained after superposition. Depending on high-speed digital communication standards, the advanced time domain analysis option can perform efficient Pass/Fail testing using a pre-defined eye map template.

Large dynamic range

3671 series vector network analyzer adopts the design concept of fundamental wave mixing receiving to effectively expand the test dynamic range of the whole machine, which can meet your test requirements of large dynamic range.

Advanced Time Domain Analysis (TDR option)

With the rapid development of the information industry, the demand for network bandwidth is getting higher and higher. Advanced time domain analysis options can apply jitter, noise and other disturbance that information equipment (such as large servers, computers and switches, etc.) can bear on the simulation eye map. Through the addition of correction algorithms such as pre-weighting and equalization, the simulation of high data rate in the real environment is getting faster and faster. Information equipment manufacturers pay more and more attention to the signal integrity in high-speed interconnect channels. The characteristics of transmission links will significantly affect the simulation eye map at different locations of the speed link. Advanced time domain analysis option is an important means to evaluate the transmission quality of high-speed link signal. TDR time domain impedance test can accurately test the changes of impedance characteristics on the transmission line and locate discontinuities. Convenient near-end and far-end crosstalk test, can simultaneously analyze time domain and frequency domain data, used to test the degree of interaction between multiple transmission lines.

Automatic fixture removal (optional)

The measurement objects of vector network analyzer are related to non-standard joint devices, such as encapsulated microwave devices and on-chip devices. The most notable feature of this type of device is that it cannot be directly connected to the vector network analyzer. The fixture can be connected to the vector network analyzer, but the fixture error is also introduced. The automatic fixture removal function can extract, store and embed the fixture parameters to obtain the real parameters of the tested parts. It is easy to operate and has high precision. By using the automatic fixture removal function, the NEQUALIZER extracts the balance parameters of the tested component as a whole and performs four-port de-embedding. The test results show that the transmission parameters can be well removed, and the proximal and remote crosstalk can also be effectively removed. When describing the fixture, you can set the single-end fixture and differential fixture, and also select the port number of the fixture and other information. To extract the parameters of the fixture, it is necessary to measure the standard of the fixture. In the standard description interface, the fixture standard includes three types: straight through standard, open circuit standard and short circuit standard.

AV3672C-S Technical Specifications

Standard fittings