Description

ASTM D1264 Water Washout Characteristics Lubricating Grease Tester

Overview

Tester for Determining the Water Washout Characteristics of Lubricating Greases is designed and manufactured according to the standard of ASTM D1264. It can test the capacity of resistance water out of the bearing grease strictly in compliance with standard description.

ASTM D1264 Water Washout Characteristics Lubricating Grease Tester

Standard Description

Put the grease sample into the ball bearings, and then loaded the bearings into bearing holder which has the specified clearance requirements and roll the holder at the speed of 600r/min±30r/min. To spray the water (under the temperature of 38℃ or 79℃) to the bearing holder at the rate of 5mL/s±0.5mL/s and to measure the water resistant ability by the grease volume washed out by the water within 60 min.

 Structural Features

Tester for Determining the Water Washout Characteristics of Lubricating Greases mainly consists of temperature control system, water spray circulation system, transmission organ, white steel bath and shell.

ASTM D1264 Water Washout Characteristics Lubricating Grease Tester

The constant bath temperature of Tester for Determining the Water Washout Characteristics of Lubricating Greases is controlled by the digital temperature controller and the temperature range is between room temperature and 85℃, the temperature-controlled precision is ±0.5℃. It is easy to set the temperature and correct the temperature differences because the digital temperature controller can visually display the setting and actual temperature.

Adopted micro-magnetic circulation pump, the water spray circulation system of Tester for Determining the Water Washout Characteristics of Lubricating Greases has the features of low noise emission and long continuous working time.

The transmission mechanism of Tester for Determining the Water Washout Characteristics of Lubricating Greases is operated by a set of bearing assembly driven by the electrical machine.

Tester for Determining the Water Washout Characteristics of Lubricating Greases is featured by attractive exterior design, reasonable structure design, simplified operation and accurate outcome measures.

Product Paramenters

1. Applicable standard: ASTM D1264. SH/T0109
2. Temperature control accuracy: ±0.1℃
3. Temperature control range: room temperature～100℃
4. Normal working temperature: 38℃±0.1℃ and 79℃±0.1℃
5. Working speed: 600rpm±30rpm
6. Capillary flow: 5ml/s±0.5ml/s
7. Working power supply: AC220V/50HZ(Customizable according to customer requirements)
8. Power of the whole machine: 600W

Main Feature

1. One-piece structure, the instrument shell is made of refined steel plate and glazed, which is durable
2. The test bearing chamber and housing fully meet the requirements of the standard method
3. Stainless steel water tank with inlet and outlet pipes, aluminum bearing chamber, copper chrome-plated circulating pump, 1/4 HP motor
4. Stainless steel heater
5. The thermostat of the instrument is an intelligent regulator that integrates temperature control and display, and is equipped with a microprocessor for PID adjustment.
6. The unique design can not start the test shaft, but start the water pump circulation system alone
7. Fixed speed motor, without speed regulation, the speed is 600rpm;
8. Accurately control the test temperature of 38°C and 79°C according to ASTM standards;
9. The improved connecting shaft can quickly and easily disassemble and assemble the test bearing and the inner and outer baffles;