Coating Thickness Gauge LT220
- Description
- Inquiry
Description
Coating Thickness Gauge LT220
Features:
- Two measuring methods: magnetism induction(F) and eddy current(N). When F probe is equipped, it can measure the non-magnetic coatings on magnetism substrate, when N probe is equipped, it can measure the non-conduction coating on non-magnetism substrate
- 8 types of probes are available for various application:F1,F1/90,F3,F10,F400,N1,N3,N400
- Two measuring modes:continue/single
- Two working modes: direct mode(DITECT) and Batch mode(APPL)
- 5 statistic ways:Mean values/Max.values/Min.values/Testing numbers(No.)/Standard deviations(S.Dev)
- Two measuring calibration modes
- With backlight display
- 640 measured values can be stored
- Low battery indication
- 2 switch off modes: manual and auto
Coating Thickness Gauge LT220
Technical specification
| Measuring range | See table in next page |
| Probe available | |
| Tolerance | |
| Minimum resolution | |
| Measuring condition | |
| Operation language | English/Chinese |
| Standards | DIN,ISO,ASTM,BS |
| Calibration | Zero and foil calibration |
| Interface | USB |
| Statistic | Number of measurement, mean, standard deviation, maximum and minimum |
| Data memory | 640 readings |
| Limits | Adjustable with alarm |
| Power supply | NiMH rechargable battery |
| Dimensions(mm) | 230×86×47 |
| Operating environment | Temperature:0~40 |
| Humidity:20%~90% | |
| No strong magnetic field |
Standard Delivery
| NAME | NUMBER |
| Main unit | 1 |
| Probe(F1/N1) | 1 |
| Substrate | 5 |
| Calibration foil | 1 |
| Instruction manual | 1 |
| Communication cable | 1 |
| Dataview software | 1 |
