Desktop Color Spectrum 45/0 Spectrophotometer 800C/CS-800CG
- Description
- Inquiry
Description
Desktop 45/0-Color measuring instrument CS-800C/CS-800CG
Color Spectrum 45/0 Spectrophotometer is a small lightweight portable 45°/0 optical color measuring instrument, at the same time can achieve 60° gloss synchronous measurement. The 45°/0 geometrical optics structure is the most consistent with the visual perceptual color value, which can eliminate the specular light on the surface of the texture, and the built-in gloss sensor can accurately measure the gloss of the surface. It is suitable for the color and gloss measurement of automotive interior parts, textiles, coil coatings, plastic products, road traffic representations, packaging and raw materials.
1.Instrument Introduction
1).the instrument uses 45/0 structure (45° annular illumination, 0° observation angle)
The innovative annular illumination system eliminates the direction dependence, regardless of changing the sample position, the tilt sample or the rotating instrument can achieve the high accuracy and the repeatability, will reduce the influence which the grain brings to the lowest. The measurement on the surface of abrasive, textured and structured materials has brought great advantages.
45°/0 structure schematic diagram
2).compatible with the 60° measurement of Gloss
The instrument is built with a high-precision gloss measuring sensor that enables simultaneous measurement of gloss and color.
3). in line with national measurement standards
The instrument complies with all the color measurement standards of Cie,iso,astm,din and achieves the international level.
4).color QC software
Standard color management software, suitable for all industry quality control and color data management. The user’s measurement management data, retain historical data, compare color gloss differences, generate test reports, provide a variety of color space measurement data, customized customer color management, and realize the digital management of measurement.
5).National Metrological Verification Report
Color spectrum technology for each color measuring instrument are tested, each instrument after the factory sent to the authority of the verification department to carry out metrological verification, measuring data traceability to the National Institute of Metrology, to ensure the authority of instrument test data.
6).360 degrees to enhance the customer experience
Large capacity rechargeable lithium battery
Configure high resolution Full-color true Color large screen
Connect to PC via USB and custom Bluetooth
You can configure a miniature printer to print test data at any time.
7).Longest Device Guarantee Time
a. One Year Guarantee Time.
b. If testing data is not correct, we can do refund.
c. We will provide testing report for every device to assure the authority of the data and it will save the calibration cost for 1 year.
Desktop 45/0-Color measuring instrument / Table Spectrophotometer CS-800C/CS-800CG
2.The details of the instrument display
Desktop 45/0-Color measuring instrument / Table Spectrophotometer CS-800C/CS-800CG
3.Technical Data
| Brand name | CHNSpec | |
| Model Number | CS-800C | CS-800CG |
| Function | Color | Color, 60° Luster |
| Geometry | 45/0(45 ring-shaped illumination,0 observe degree) | |
| Aperture | 11mm | |
| Wavelength | 400-700nm | |
| Wavelength interval | 10nm | |
| Sensor | High sensitivity silicon photodiode | |
| Illumination | LED | |
| Repeatability | light splitting reflectivity:standard deviation within 0.08% | |
| color values;ΔE*ab<=0.03(After calibration, standard deviation of 30 measurements on test white board, 5 second intervals),Maximum:0.05 | ||
| Inter-instrument agreement | ΔE*ab within 0.2(BCRA color charts II, average of the 12 charts) | |
| Language | English, Chinese | |
| Observer | 2°/ 10° | |
| Light Source | A,C,D50,D55,D65,D75,F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11,F12,CWF,U30.DLF,NBF,TL83,TL84.U35 | |
| Color space | CIE-L*a*b, L*C*h, L*u*v, XYZ, Yxy, Reflectance Hunterlab,Munsell MI,CMYK,RGB,HSB | |
| Index | WI(ASTM E313-10,ASTM E313-73,CIE/ISO, AATCC, Hunter, Taube Berger, Ganz, Stensby); YI(ASTM D1925,ASTM E313-00,ASTM E313-73);Tint(ASTM E313,CIE,Ganz) Metamerism index Milm, Stick color fastness, Color fastness ISO luminance, 8 gloss, A density, T density, M density, E density | |
| Color Difference | ΔE*ab,ΔE*CH,ΔE*uv,ΔE*cmc(2:1),ΔE*cmc(1:1),ΔE*94,ΔE*00,ΔEab(Hunter),555 shade sort | |
| Color Space | CIE-15-2004;ASTM-D523;ASTM-D2244;ASTM D2457 | |
| Test Angle | 60° | |
| Test Area | 5×10 mm | |
| Test Range | 0 – 1000 GU | |
| Repeatability | 0.2GU(0-100GU) 0.2%(100-1000GU) | |
| Reproducibility | 1.0 GU(0-100GU) 1.0%(100-1000GU) | |
| Illumination Life Time | 10 years 3 million test | |
| Language | English, Chinese | |
| Data storage | 20000 test results | |
| Interface | USB | |
| Screen | 5.0 inch color screen | |
| Battery capacity | rechargeable, 10000 continuous tests, 7.4V/6000mAh | |
| Work temperature range | 0~45℃, relative humidity 80% or below( at 35°C ),no condensation | |
| Size | 350*300*200mm(L*W*H) | |
| Weight | about 4.5kg(without battery) | |
| Standard accessories | AC adapter, lithium battery, manual, color management software, driver software, manual electronic version, color Management tutorial, data cable, black and white correction tube, portable bag | |
| Gloss Calibration Tile | ||
| Optional accessories | Measurement Area Locator | |
4. Application Examples
5. Technical Support
1). One year warranty.
2). Product problems provide customer replacement machine.
3). Each machine provides the measurement test report, guarantees the authoritative data, simultaneously saves the customer one year the calibration expense.
