Description

E26 7006-29-3 Contact performance gauge

IEC 60061-3 7006-29-3 American rules and Japanese rules Contact performance gauge E26 Lamp cap gauge
E26/E26d lamp cap gauge

Product name :E26 lamp holder gauge Technical standard :GB 1483/ IEC 60061-3

E26 Lamp cap gauge Classification:

IEC 60061-3 7006-29-3 American rules and Japanese rules Contact performance gauge E26 Lamp cap gauge

Serial numberGauge typeGauge nameStandard drawing number
1E26Lamp cap pass gauge7006-29L-4
2E26Lamp cap contact performance gauge (US gauge)7006-29-3
3E26Lamp cap contact performance gauge (Day gauge)7006-29-3
4E26Lamp holder Anti-accidental contact gauge (anti-electric shock)7006-29A-2

  1. The value is for lamps fitted with E26/24 caps. For lamps fitted with E26/25 caps, dimension K is 29.3mm.
  2. The value is for lamps fitted with E26/24 caps. For lamps fitted with E26/25 caps, dimension M is 25.9mm.
  3. The gauge is shown in the test position. In the rest position the plunger shall be above plane V.
  4. Only for E26/24
ReferenceDimension(mm)Tolerance(mm)ReferenceDimensionTolerance
d26.52+0.0/-0.02N(4)25.4+0.02/-0.0
H14.0+0.1/-0.1X28.19+0.0/-0.02
K27.94(1)+0.05/-0.0Z45+0.1/-0.1
M24.43(2)+0.05/-0.0α2±30′

IEC 60061-3 7006-29-3 American rules and Japanese rules Contact performance gauge E26 Lamp cap gauge
Purpose:

To check lamp dimensions for contact making in IEC holders.

IEC 60061-3 7006-29-3 American rules and Japanese rules Contact performance gauge E26 Lamp cap gauge
Testing :

The shape of the lamp with regard to the fit in the lampholder is assured to be correct. If the lamp can be pushed into the gauge till plane W reaches plane V or project beyond it.

For E26/24 capped lamps, when surfaces V and W are coincident, the top of the cap including any solder or conductive material, shall not extend above surface X.






    has been added to your cart:
    Checkout