Description

K-8000 Handheld alloy analyzer

K-8000 Metal spectrum analyzer handheld alloy tester handheld stainless steel material detector
Product description
K-8000 adopts single-beam low-voltage technology, which greatly prolongates the cycle of instrument replacement parts. K-8000 handheld alloy spectrometer non-destructive, fast, accurate analysis and detection of alloy elements and alloy brand; Rapid one-button analysis of more than twenty-five elements ranging from titanium (Ti) to uranium (U).

K-8000 Metal spectrum analyzer handheld alloy tester handheld stainless steel material detector
K-8000 handheld spectrometer product application:

1, used for non-destructive, rapid and accurate analysis and detection of alloy elements and alloy brand identification.
2. Rapid analysis of the content of more than 25 elements ranging from titanium (Ti) to uranium (U).

K-8000 Metal spectrum analyzer handheld alloy tester handheld stainless steel material detector
Product features:
1, one-button operation, remove complex operation options, effectively prevent human misoperation;
2. Software exits and shuts down automatically; (Users can customize shutdown time)
3, automatic calibration instrument, no manual operation;

4, boot to test only needs 45 seconds, 0.8 seconds out of alloy brand and data.

5, multinational data brand database (standard with American standard alloy database, you can add other national standards)

K-8000 Metal spectrum analyzer handheld alloy tester handheld stainless steel material detector
Technical specification for K-8000 Comis Portable spectrometer
1. Environmental requirements: Temperature is -20~50ºC, relative humidity is 10~90%(no condensation), and there should be no strong magnetic field, strong vibration source and high-frequency equipment near the work site.
2, waterproof, dustproof, anti-tie, anti-fall; The instrument has a good balance, can stand on the workbench during the test, without hand help, one-button design, even if the operation for a long time without fatigue
3, excitation source: high power micro straight plate electron X-ray tube, excitation voltage is 35kV; No high voltage cables, no RF noise, better X-ray shielding, better heat dissipation.
Fixed voltage 35kV, current 100uA (Moxtek), standard Ag target, W target, Rh target can be customized.

4, using KMX technology, higher X-ray counting rate, the inner shell of the instrument spraying conductive silver coating and circuit board electronic shielding cloth, to prevent electromagnetic interference stable element resolution design.
PLUS version built-in calibration block, no external standard sample, automatic energy calibration check;

5, detector: Si-pin detector, can simultaneously record analysis data and spectrogram; Moxtek Si-PIN Detector (6 mm2 energy resolution 170eV FWHM) or Amptek Si-PIN Detector (25mm2) Energy resolution 190eV FWHM)

6, filter: equipped with a single filter, no need to switch motor;
7, calculation method: KMX-FP no standard sample test method, support empirical coefficient method correction;
8. Display: LCD resistive touch screen;
9, touch or pull the trigger control test begins, the test process does not require a long trigger. According to customer requirements, you can also always hold the trigger to test the sample.
10, security: trigger lock function, can set the locking time. When opened, neither the touch nor the trigger can perform the operation;
11, battery: the original 7.2V large capacity rechargeable lithium battery, do not pull the battery can be directly at the bottom to check the power; One lithium battery is standard
12, film window replacement: without the help of tools, you can easily replace the window film;
13. Operating system: Window CE 6.0 industrial instrument special operating system, safe and assured;
14, data display: elements can be adjusted according to the test requirements, the element display order or display;
15, data storage: 4GB embedded storage, standard 32G MicroSD card, can store 300,000 sets of data and X-Ray spectrum, can be expanded storage capacity;
16, data export: One is through the storage device SD card or U disk, directly export the data; One is to export data through PC software;
17, data format: pdf or Excel format, including element content, graph, image, etc., and a variety of templates to choose from;
18. Data transfer: MicroSD card

K-8000 Metal spectrum analyzer handheld alloy tester handheld stainless steel material detector
K-8000 instrument design features:

1, good heat dissipation: more than 2/3 of the body adopts aluminum alloy shell design, the top of the instrument some trough type heat dissipation device, the whole system makes the heat dissipation is very effective, prolong the machine life, X-ray analyzer work more stable, so that the failure rate is very low

2. Simple operation: the design concept of the instrument is simple and economic principle. The hardware uses fixed high pressure, eliminates the internal complex motor and filter, external 316 calibration plate and other simple design; The software adopts simpleton operation interface. Really let the customer with the least cost to get more revenue. Three clicks on the screen can do 45 seconds startup test, 0.8 seconds out brand and content;

3, humanized design: light weight (1.6kg); Small size (220mm*150mm*220); Durable anti-fall wrist rope; Battery power feedback light at the bottom of the instrument; Top and bottom radiation warning flashing lights; Diamond-grained soft rubber handle; The instrument has a good balance, can stand on the workbench during the test, without hand help, one-button design, even if the operation for a long time without fatigue; Display to achieve the integrated design of the whole machine, the whole machine structure, PDA is not detachable, dustproof, anti-fog, waterproof, low fault industrial high resolution TFT touch display color screen.

4, accurate test data: instrument software using the basic parameter method, K-1688 portable spectrometer in alloy analysis before the need to know the type of alloy, automatic analysis standard library has more than 500 standard brand, can analyze up to ten thousand kinds of alloy, user can customize 300 kinds; The compensatory test method for irregular or small samples can detect very small or very small samples, such as the diameter of 0.04mm filaments can be immediately recognized; It can analyze Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Hf, Ta, W, Re, Pb, Bi, Zr, Nb, Mo, Pd, Ag, Cd, Sn, Sb and other 23 elements
​ ​