This is for high-precision melt flow rate instrument tester, used for testing all kinds of plastic, resin in the state of viscous flow through a certain temperature and load, every 10 min module and melt flow rate through the standard port MFR/MVR value, it is suitable for high temperature of polycarbonate, aromatic sulfone, fluorine plastics, nylon engineering plastics, can also be applied to polyethylene (PE), polystyrene (PS), polypropylene (PP), ABS resin, polyformaldehyde (POM), polycarbonate (PC) resin with lower melting temperature, such as plastic test, widely used in plastic production, plastic products, petrochemical industry and related colleges and universities.


GB/T3682-2000,ISO1133-97, ASTM1238

Barrel parametersInner hole 9.55±0.025mm
Pistons parametersPiston head:  9.475±0.015mm
Outlet length8.000±0.025mm
ParamtersExtrusion hole 1=2.095±0.005mm
Temperature parameterWith intelligent temperature control instrument, with four pairs of significant temperature setting control, PID parameters can be automatically set, precision up to ± 0.1 degree centigrade
Temperature rangeRoom Temperature~450degree centigrade
Temperature fluctuation±0.2 ℃
Temperature uniformity±1℃
Temperature display resolution0.1℃
Display resolution 0.1℃
Maximum comsuption < 600W
Time display resolution 0.1s
Weight parameters are as follows:
Weight accuracy ±0.5%
Basic configuration


A    0.325kg
B    1.2kg
C    2.16kg
D    3.8kg
E     5kg
F     10kg
G    12.5kg
H     21.6kg
Position detection
Loop distance from up and down30mm
Control precision± 0.1mm
Test flow control
Times of cutting the material0~10 times
Material cutting interval0~999s(set reference Table 2)
Control flow reaches the set temperature without volatility
Barrel temperature time15 min.
Material be installed1 min.
Material sample temperature recovery time4 min.
When binder set1min
Output modeMicro-automatic print output
Cut material methodsThe hand automatic cut into one body
Test loadEight sets of weights
PowerAC220V±10%   50/60HZ

    has been added to your cart: