LR-A044 Pneumatic Small Vertical Injection Molding Machine

Description

LR-A044   Pneumatic Small Vertical Injection Molding Machine

1.Equipment introduction

An injection molding machine is a mechanical device. It is usually composed of injection system, die closing system, pressure transmission system, electrical control system, lubrication system, heating and cooling system, safety monitoring system and so on.

Injection system is one of the most important parts of injection molding machine, generally has plunger type, screw type, screw premolded plunger injection type three main forms. At present, the screw type is the most widely used. Its function is that in a cycle of the plastic injection machine, a certain amount of plastic can be heated and plasticized within a specified time, and the molten plastic can be injected into the mold cavity through the screw under a certain pressure and speed.

LR-A044   Pneumatic Small Vertical Injection Molding Machine

2.Product Features

1, humanized workbench height design, suitable for large machine, comfortable operation, so as to reduce the labor intensity of the operator, improve work efficiency.

2.The injection molding machine adopts pneumatic operation design to achieve the requirements of fast, simple and easy maintenance.

3.The movable parts of template and machine column are made of high rigid copper bushing to meet the requirements of smooth movement and long service life and high precision.

4, injection molding system adopts pneumatic double guide column design, smooth movement, high injection accuracy.

5.Manual feeding is adopted.

6, table pliers mold installation, disassembly is convenient, can greatly improve the output and work efficiency.

7, mold adjustment alone side control, convenient from the Angle of view, humanized Angle to facilitate rapid exchange of molds.

8, humanized design of the launching platform lifting system, convenient, fast, time and manpower saving mold adjustment or mold change.

LR-A044   Pneumatic Small Vertical Injection Molding Machine

Technical Specification

ModelLR-A04420LR-A04440LR-A04460
Temperature rangeRT〜450℃(±3℃)【Max limit 450degree】
Plunger diameter【mm】25mm3545
Max compression stroke【mm】150mm
Heating cavity size【mm】25 * 11035 * 11045 * 110
Max injection capacity【mm】20g40g60g
Injection pressure1T1T2T
Injection time0-9999s【can set】
Cavity structureCan be replaced is the mold cavity, effectively prevent material mutual pollution
Security and protectionProtective door + safety grating [Optional parts]
Maximum size for mold installation200 * 160 * 210200 * 200 * 210210 * 200 * 210
Machine weight【kg】355565
power800w1000w1200w
Voltage220V/ 60HZ
Air source0.6mpa
Control Methodspneumatic
Outside size(mm)550 * 600 * 1300600 * 660 * 1400650 * 660 * 1550






    has been added to your cart:
    Checkout