LR-B007   Touched Screen Salt Spray Tester


This machine has a standardized test method to check corrosion resistence of coated samples. Salt spray test is an accelerated corrosion test that produces a corrosive attack to the coated samples in order to predict its suitability in use as a protective finish. The appearance of corrosion products (oxides) is evaluated after a period of time. Test duration depends on the corrosion resistance of the coating; the more corrosion resistant the coating is, the longer the period in testing without showing signs of corrosion. Different coatings have different behaviour in salt spray test and consequently, test duration will differ from one type of coating to another.

Design Standards:ISO 9227,GB/T 2423.17-1993 ,GB/T 2423.18-2000,GB/T 10125-1997,ASTM.B117-97

JIS H8502 ,IEC68-2-11,IEC68-2-52 1996 ,GB.10587-89,CNS.4158,CNS.4159,CASS,GB/T 12967.3-91 CASS

LR-B007   Touched Screen Salt Spray Tester

Inner size:

Inner size1200×1000×500(L×W×H)mm
Outside size1900×1300×1400(L×W×H)mm
Test room temperatureNSS ACSS 35℃±1℃/ CASS 50℃±1℃
Pressure Barrel TemperatureNSS ACSS 47℃±1℃/ CASS 63℃±1℃
Laboratory capacity600L
Volume of salt water tank25L
Compressed air pressure1.00±0.01kgf/cm2
Volume of spray1.0-2.0ml/80cm2.h
Laboratory relative humidity85%RH above

LR-B007   Touched Screen Salt Spray Tester

Technical base:

A.Salt spray test:NSS,ACSS
1.Test room:35℃ ± 1℃ Fluctuation:≤±0.5℃ uniformity: ≤2℃
2.Saturated air barrel temperature:47℃ ± 1℃
B.Corrosion resistance test:CASS
1. test room:50℃±1℃  fluctuation:≤±0.5℃ uniformity: ≤2℃
2.Saturated air barrel temperature:63℃ ± 1℃


    has been added to your cart: