Touched Screen Salt Spray Tester


This machine has a standardized test method to check corrosion resistence of coated samples. Salt spray test is an accelerated corrosion test that produces a corrosive attack to the coated samples in order to predict its suitability in use as a protective finish. The appearance of corrosion products (oxides) is evaluated after a period of time. Test duration depends on the corrosion resistance of the coating; the more corrosion resistant the coating is, the longer the period in testing without showing signs of corrosion. Different coatings have different behaviour in salt spray test and consequently, test duration will differ from one type of coating to another.

Design Standards:ISO 9227,GB/T 2423.17-1993 ,GB/T 2423.18-2000,GB/T 10125-1997,ASTM.B117-97

JIS H8502 ,IEC68-2-11,IEC68-2-52 1996 ,GB.10587-89,CNS.4158,CNS.4159,CASS,GB/T 12967.3-91 CASS

Touched Screen Salt Spray Tester

Inner size:

900×600×500mm ( W * D * H)

Outside size:1415×885×1285mm ( W * D * H)

Power:220V  2KW  50HZ

Temperature ranges: RT + 10 ℃ ~ 55 ℃

Humidity range: ≥ 93%R.H

Temperature uniformity: ± 2 ℃

Temperature fluctuation degree: ± 0.5 ℃

Fog settlement: 1 ~ 2 ml / 80 c ㎡

Spray mode: continuous/periodic optional

Touched Screen Salt Spray Tester

Technical base:

A.Salt spray test:NSS,ACSS
1.Test room:35℃ ± 1℃ Fluctuation:≤±0.5℃ uniformity: ≤2℃
2.Saturated air barrel temperature:47℃ ± 1℃
B.Corrosion resistance test:CASS
1. test room:50℃±1℃  fluctuation:≤±0.5℃ uniformity: ≤2℃
2.Saturated air barrel temperature:63℃ ± 1℃


    has been added to your cart: