LR-STA200 Synchronous thermal analyzer
- Description
- Inquiry
Description
LR-STA200 Synchronous thermal analyzer
Synchronous thermal analysis combines thermogravimetric analysis TG with differential thermal analysis DTA or differential scanning calorimetry DSC. The information of TG and DTA or DSC can be obtained synchronously by using the same sample in the same measurement.
The following properties of the materials are measured and studied:
DSC: melting, crystallization, phase transformation, reaction temperature and reaction heat;
TG: thermal stability, decomposition, REDOX, adsorption and desorption, free water and crystal water content, composition ratio calculation, etc
LR-STA200 Synchronous thermal analyzer
Structural Advantages:
1. The furnace body is heated by double row winding of precious metal wire, which reduces interference and is more resistant to high temperature.
2 Tray sensor, using ceramic rod as the connecting rod, with high temperature resistance, oxidation resistance, corrosion resistance and other advantages.
3. The power supply and circulation heat dissipation parts are separated from the main engine to reduce the influence of heat and vibration on the micro thermal balance.
4. Open cover structure, easy to operate.
5. The host adopts heat insulation device to isolate the heat influence of heating furnace body on the chassis and micro thermal balance.
6. The furnace body can be replaced according to customer requirements
Advantages of controller and software:
1. Independent AD acquisition circuit, sampling speed, fast processing speed, you can set different sampling rates.
2. Signal acquisition circuit can collect TG signal and temperature T signal at the same time.
3. Double layer heat insulation is adopted at the bottom of the furnace body to avoid the influence of thermal radiation on the weighing system
4. USB two-way communication is adopted between the software and the instrument to fully realize remote operation. The parameters of the instrument can be set and the operation of the instrument can be stopped by computer software.
5.7 inch full color 24bit touch screen, better man-machine interface. TG calibration can be achieved on the touch screen
LR-STA200 Synchronous thermal analyzer
Technical parameters:
Dz-sta200 synchronous thermal analyzer
1. Temperature range: room temperature ~1200 ° C
2. Temperature resolution: 0.01℃
3. Temperature fluctuation: ±0.1℃
4. Heating rate: 0.1~100℃/min
5. Temperature control mode: heating, constant temperature
6 constant temperature time: 0 ~ 300min arbitrary setting (can be extended 72h)
7 cooling time: ≤15min(1000℃~100℃)
8 balance measurement range: 0.1mg ~ 2G can be extended to 5G
9. Accuracy of TG: 0.01mg
10. Resolution of TG: 0.1ug
11.DSC range: 0 ~ ±1000mW
12 DSC resolution: 0.1UW
13. Accuracy: 0.01MW
14. Display mode: 24bit color, 7 “LCD touch screen display
15. Atmosphere device: built-in gas flow meter, including two gas switching and flow size control
Atmosphere: inert, oxidizing, reducing, static, dynamic
16. Software: Intelligent software, which can process the data of TG, DTG and TG-DSC curves, export EXECL, generate PDF report and print experimental reports
17. Data interface: standard USB interface
18. Power supply: AC220V 50Hz
19 crucible type: ceramic crucible, aluminum crucible
20. Software: temperature, enthalpy multi point correction, meet the different temperature section of the sample test