needle flame test apparatus

This product according to used in electronic, electrical products due to fault conditions, such as through the leak path of fault current, components or parts of overheating, such as bad contact also may cause fire, it may be shot into the nearby on the part of the test is simulation under fault conditions inside the product produced by the small flame, simulation technology is used to evaluate the fire risk.For small parts (or components) or horizontal glow wire test – vertical burning test method is not fit to reference the needle flame test methods.As samples in the light-off, in testing the hot wire is produced by burning dangerous situation also need the needle flame test.Suitable for electronic electrical products, household electrical appliance parts, parts, etc., such as wiring board, centrifugal switch, electric rice cooker outlet.

Description

Uses:

This product according to used in electronic, electrical products due to fault conditions, such as through the leak path of fault current, components or parts of overheating, such as bad contact also may cause fire, it may be shot into the nearby on the part of the test is simulation under fault conditions inside the product produced by the small flame, simulation technology is used to evaluate the fire risk.For small parts (or components) or horizontal glow wire test – vertical burning test method is not fit to reference the needle flame test methods.As samples in the light-off, in testing the hot wire is produced by burning dangerous situation also need the needle flame test.Suitable for electronic electrical products, household electrical appliance parts, parts, etc., such as wiring board, centrifugal switch, electric rice cooker outlet.

Test standard:

IEC884-1 “standard electrical accessory power load ark”
GB2099.1-2008 “household and similar use plug socket part 1: general requirements”
VDE certification
IEC335-91 “household and similar electrical appliances safety. Part 1: general requirements”
GB4706.1-2005 “household and similar electrical safety, part 1 general requirements”
GB5169.5-2008 “electrical and electronic products fire dangerous test – test flames – needle flame test method”
UL1694 combustion test method.

 

Specifications

The body content product: acuity 0.5 cubic meters, with glass door
Fuel: Butane gas Butane
Burner specification: length more than 35 mm, inner diameter Ø + / – 0.1 mm, 0.5 mm outside diameter less than 0.9 mm Ø
Flame height: 12 mm + / – 1 mm is adjustable
Flame temperature: 100 ℃ to 700 ℃ within 23.5 + / – 1 S
Timer: 0 ~ 99 minutes, 99 seconds range adjustable, burning time can be set, the combustion duration can be recorded
Product features: this tester combustion box and main mechanical parts adopt stainless steel, aesthetically pleasing, smoke, gas corrosion resistance.Time digital display, three-dimensional adjustable clamps and automation control system, independent convulsions, observation records use convenient, stable and reliable.With the temperature measuring device.
Power supply: AC220V / 50 hz

 






    has been added to your cart:
    Checkout