- Description
- Inquiry
Description
Shell mechanical strength tester 0.5J±0.05J spring impact test device
Medical electrical equipment — Part 1: General requirements for safety
GB9706.1 Article 21 requirements
b) The strength test of the shell or the shell components and all their parts shall be carried out by striking the sample with an impact energy of 0.5J005J using the spring impact test device shown and described in Appendix G.
Shell mechanical strength tester 0.5J±0.05J spring impact test device
Spring impactor according to GB/T2423(IEC60068-2-75) standard requirements design and manufacture, used for the impact resistance of electronic and electrical products test, is to detect electrical products shell under the mechanical external force under the condition of safety performance necessary test equipment. It is suitable for household and similar electrical appliances, electronic products, lamps, electrical accessories shell, operating lever, handle, knob, indicator light, signal lamp and lampshade to carry out mechanical strength test, to ensure that the tested products can withstand the possible reckless operation and other accidents, electrical products can run safely and reliably, will not cause harm to people
Shell mechanical strength tester 0.5J±0.05J spring impact test device
Technical parameters:
| Length | 211mm | Hammer radiu | 10mm |
| Weight | Single gear 1250g, six gear 2500g | Impact components | Operating handle and hammer head made of white polykuimide |
| Outer diameter | 50mm | Impact release force | less than 10N |
| Hammer weight | 60g |
Shell mechanical strength tester 0.5J±0.05J spring impact test device
Spring impactor according to GB/T2423(IEC60068-2-75) standard requirements design and manufacture, used for the impact resistance of electronic and electrical products test, is to detect electrical products shell under the mechanical external force under the condition of safety performance necessary test equipment. It is suitable for household and similar electrical appliances, electronic products, lamps, electrical accessories shell, operating lever, handle, knob, indicator light, signal lamp and lampshade to carry out mechanical strength test, to ensure that the tested products can withstand the possible reckless operation and other accidents, electrical products can run safely and reliably, will not cause harm to people
