Button Shedding Tester
17

Testador de queda de botão

Testador de solidez de cor para couro de tecido Testador de solidez de cor de tecido e couro
Testador de solidez de cor de tingimento por fricção de tecido JISL Testador de solidez de cor de tingimento por fricção de tecido JISL

The purpose of this test is to define the liability of garment manufacturers to ensure that buttons, buttons and fasteners are properly fastened to garments to prevent buttons from coming out of garments and creating a risk of ingestion by infants. Portanto, all buttons, buttons and fasteners on garments are tested by a button strength tester. This machine can do uniform vertical tension test for all kinds of buttons on clothing, and test whether its firmness can meet the relevant safety standards.

 

Categoria: Marcação:

Descrição

Button shedding tester,Button tension testing machine

Parâmetros técnicos:
The purpose of this test is to define the liability of garment manufacturers to ensure that buttons, buttons and fasteners are properly fastened to garments to prevent buttons from coming out of garments and creating a risk of ingestion by infants. Portanto, all buttons, buttons and fasteners on garments are tested by a button strength tester. This machine can do uniform vertical tension test for all kinds of buttons on clothing, and test whether its firmness can meet the relevant safety standards.

Button shedding tester,Button tension testing machine

Padrão

16 CFR 1500.51-53, ASTM PS79-96

Button shedding tester,Button tension testing machine

Configuração padrão

Tension seatPush tension meter (30kg)
Two jaw forcepsThree-claw pliers
Tension pliersBottom fabric jig
Test fixture for male buttonMother button test fixture
Tamanho280*220*950milímetros
Operation instruction:1. Instale o acessório, combine o botão de teste, e bloqueie o modelo de teste na base
2. Put down the clamp, grip the buttons and pull them upward. Each set of buttons should be able to withstand a tensile force of at least 17 libras (7.72kg) and hold for 10 seconds without any looseness or breakage. Pelo menos 20 buttons of each type should be tested for 10 seconds without looseness or breakage.
3. Se um dos botões estiver solto ou danificado, or all the buttons must be retested after replacement.

Button shedding tester,Button tension testing machine

Parâmetros técnicos:
The purpose of this test is to define the liability of garment manufacturers to ensure that buttons, buttons and fasteners are properly fastened to garments to prevent buttons from coming out of garments and creating a risk of ingestion by infants. Portanto, all buttons, buttons and fasteners on garments are tested by a button strength tester. This machine can do uniform vertical tension test for all kinds of buttons on clothing, and test whether its firmness can meet the relevant safety standards.

Testador de queda de botão






    Produtos relacionados

    Foi adicionado ao seu carrinho:
    Confira