Equipamento digital de teste de impacto IZOD CHARPY
- Descrição
- Investigação
Descrição
Equipamento de teste de impacto IZOD CHARPY EUntroduction:
Digital IZOD CHARPY Impact test equipment is controlled by single chip microcomputer, electric hammer release, liquid crystal display impact energy, each group of samples can do one to ten, the test can be arbitrarily cut data.Automatic calculation of the strength, the average strength.Automatic printing of data reports.
IZOD CHARPY Impact test equipment Scope of application
The impact testing machine can perform impact testing on hard plastics, fiber reinforced composites, glass fiber reinforced plastics, cerâmica, asbestos and other non-metallic materials.
Applicable standards:
ISO179-2000 “plásticos – determinação da resistência ao impacto da viga simplesmente apoiada com material duro,
GB/T 21189 < viga de plástico e viga cantilever e teste de impacto de tração com um teste de máquina de teste de impacto de pêndulo >
GB/T1043-2008 “o método de teste de impacto de feixe de plástico rígido”
JB/T8762-1998 plastic beam impact testing machine,
GB/T 18743-18743 “com método de teste de impacto de feixe de tubo de transporte de fluido termoplástico” (aplicável ao tubo)
ISO180-2000 “plásticos – determinação da resistência ao impacto do feixe cantilever de material duro
GB/T1843-2008 “o método de teste de impacto de feixe cantilever de plástico rígido”
JB/T8761-1998 plastic cantilever beam impact testing machine,
ASTM D256-2010 “método de teste para determinação de plástico a resistência ao impacto do pêndulo IZOD,
GB – T13525-1992 “método de teste de impacto de tração de plástico para desempenho”
Equipamento de teste de impacto IZOD CHARPY Especificação técnica
Modelo | A | B |
Energia impactante | 1J.、2J.、4J.、5J. | 7.5J.、15J.、25J.、50J. |
Velocidade de impacto | 2.9EM | 3.8EM |
Pendulum Angle | 150° | 160° |
Distance from center of pendulum to center of sample | 230milímetros | 380milímetros |
Pendulum torque | Pd1=0.5155N.m Pd2=1.0311N.m Pd5=2.5777N.m | Pd7.5=3.8662N.m Pd15=7.7324N.m Pd25=12.8888N.m Pd50=25.777N.m |
Jaw support spacing | 40milímetros、60milímetros、70milímetros、95milímetros | |
Support blade fillet radius | R=1mm | |
Angle of impact blade | 30° | |
Impact blade fillet radius | R=2mm | |
Accuracy of energy | 0.01J. | 0.01J. |
CHARPY FIXTURE
CHARACTER
Personagem:
Ø cantilever beam, one-piece shock, do not need to remove the clamp and fixed sample
Ø intelligent controller has high precision, and is equipped with LCD display, can be intuitive, accurate reading data
Ø the first domestic use carbon fiber beam (has applied for patent), on the direction of impact, improve the rigidity of materials, and will impact the quality of concentrated in the largest pendulum on the center of mass of truly no vibration impact test, and increase the service life.
Ø imported high resolution digital encoder, Angle test precision is higher and more stable
Ø aerodynamic impact hammer and imported ball bearing, greatly reduced the mechanical friction loss
Ø automatically calculate the final result, test data can be stored 24 group data and averaging
Ø can choose Chinese and English operation interface, test results can choose J/m, KJ / ㎡, kg – cm/cm, ft – ib/in etc
Internal microtyping of the printing and testing data