- Descrição
- Investigação
Descrição
Oscillating Spray Tester
Introdução:
The IPX3-4 Oscillating Spray Tester meets the requirements of IEC 60529 and other major standards. A touch screen controller is used to establish the test and control oscillation range, velocidade, and time of test. The controller and other operating components are enclosed in a stainless steel cabinet.
Numerous tubes are available to meet differing specimen sizes. These tubes are made of stainless steel and come with nozzles that can be shut off. This allows the same tube to be used for IPX3 and IPX4 with a simple adjustment to some of the nozzles.
The tubes oscillate to almost 180 degree either side of vertical. The degree of oscillation can be set on the touch screen controller or one of the three pre-set values, 60 grau, 90 grau, or almost 180 grau, can be selected.
Numerous tubes are available to meet differing specimen sizes. These tubes are made of stainless steel and come with nozzles that can be shut off. This allows the same tube to be used for IPX3 and IPX4 with a simple adjustment to some of the nozzles.
The tubes oscillate to almost 180 degree either side of vertical. The degree of oscillation can be set on the touch screen controller or one of the three pre-set values, 60 grau, 90 grau, or almost 180 grau, can be selected.
A specimen support is also included. It is supplied with two specimen bases – one perforated for IPX4 and one non-perforated for IPX3. The support is made from stainless steel and mounted on wheels for easy maneuverability and adjustment. It offers height adjustments that range from 855mm to 1300mm.
Formulários:
The oscillating spray tester is one of several methods used to test the water protection capabilities of enclosures for electronic items that are expected to be exposed to rain or water spray.
The place requires: 3.5m height of center, 3.3mX5m space area, with good drainage.
Oscillating Spray Tester
Conforms To:
IEC60529,IEC60598-1, CEI 60335-1, EN60335-1, IEC60950-1, GB4208, GB7000.1
IEC60529,IEC60598-1, CEI 60335-1, EN60335-1, IEC60950-1, GB4208, GB7000.1
