Antes de testar com a máquina de teste de desgaste TABER, levante o braço de teste do equipamento, e então inicie a fonte de alimentação para operação experimental. Daqui, podemos verificar se a máquina está funcionando corretamente. Em seguida, levante o braço de teste e o braço de sucção, remova a porca de fixação e a junta (anel) do exemplar, e use a chave para afrouxar o parafuso de fixação do anel de fixação e pegue o anel de fixação para concluir esta etapa. Depois de parar, the operator can use a small brush to remove the sand layer on the leather surface, here it needs to be noted that together with double-sided tape to remove the specimen, and then weigh with a precision scale, also for recording, counting to four decimal places, according to the formula to calculate the test value.

TABER wear-resistant testing machine can test natural leather, couro, PU, two kinds of leather, artificial leather, textile materials, vidro, paint and other wear resistance test, the method is to take a diameter of 110mm circular sample according to the requirements, according to the relevant test standards with the corresponding load weight, set the corresponding test times, the machine will automatically stop when it reaches the set times. There is no need for personnel to stay for a long time, the instrument is controlled by the LCD screen, the operation is simple, convenient and safe, and the instrument is stable and does not beat when running.

Máquina de teste de desgaste TABER Estes 8 pontos devem ser mantidos em mente

Máquina de teste de desgaste TABER Estes 8 pontos devem ser mantidos em mente

1. The instrument must be placed on a stable ground before use.

2. When the instrument is abnormal, please contact the department for timely processing;

3. Select the corresponding power supply voltage, do not be too high, to avoid burning the device;

4. It is not allowed to handle the machine during use;

5. The machine must have a good ventilation environment when working.

6. After each test, clean the machine and keep the machine clean;

7. Key mechanical components, due to the large operating load, the mechanical part please add lubricating oil in time;

8. The control box should be wiped with dry cloth, not wet cloth.