This issue of the North and South tide for your actual test machine from the United States NormanTool RCA paper tape wear testing machine, this RCA wear-resistant machine mainly through the standard wear coefficient of paper tape on the paint film for continuous wear test. It is usually used to test the wear resistance of coatings, coatings, lettering on keyboards, etc. This wear-resistant machine is used as a standard in the fields of automobiles, electronic appliances, plastics, and coatings. Today, the North and South tide opened a new 7-IBB-CC wear testing machine for everyone to experience in detail.

RCA wear-resistant paper tape machine real machine demonstration

A roll of standard paper is attached to the box. This roll of paper should not be used at will, because it is used for comparison and correction when errors occur. Therefore, when testing, use the newly purchased RCA paper tape as much as possible.

The new RCA machine has two counting panels that automatically set the number of turns to stop. Personally feel much better than the old model, the actual use of the following electronic counter can be used to do a single measurement, the above mechanical counter is used to do statistical measurement.

RCA wear-resistant paper tape machine real machine demonstration

The wear coefficient of each batch of NormanTool paper tape is not necessarily consistent, some batches are 0.9, some are 1.0, and some are 1.1. Most of the time, it’s all three. If there is a requirement for the coefficient, you can tell us in advance.

RCA machine supports continuous measurement and “point” measurement, but in general, it is more continuous measurement, and less point measurement, which is designed for some special workpieces and special needs.