ASTM D 2134-93-2019 Determinarea durității acoperirilor organice cu un tester de duritate de tip Swalt

Semnificație și scop
3.1 De mai bine de o jumătate de secol, the Sward type hardness rocker instruments have been used by the coating industry as NDE instruments to measure the cured and final surface hardness of organic coatings (see References). (1) through (2)). This test method can be used in the laboratory to quickly screen and measure the surface hardness of candidate coatings.

Notă 1: In a previous task group aimed at establishing an ASTM method for measuring the hardness of organic coatings using a Sward type hardness rocker arm instrument, cyclic test results consistently showed poor inter-laboratory reproducibility. The lack of inter-laboratory agreement may be caused by dimensional differences between instruments, and in this regard contact with the rocker arm ring is a very likely violator. Several manufacturers of the Sward type hardness rocker produce instruments that vary in net weight and ring radius. Some of them exceed the measured values and net weights required in this test method.

ASTM D 2134-93-2019 Determinarea durității acoperirilor organice cu un tester de duritate de tip Swalt

Scopul
1.1 The test method covers the determination of the relative degree of surface hardness of organic coatings using specific equipment used in the coating industry.

1.2 Valorile exprimate în unități SI vor fi considerate standarde. Valorile date în paranteze sunt doar pentru referință.

1.3 This test method is not intended to address all safety issues, dacă există, asociat cu utilizarea acestuia. Este responsabilitatea utilizatorului acestui standard să stabilească siguranța corespunzătoare, practicile de sănătate și de mediu și pentru a determina aplicabilitatea restricțiilor de reglementare înainte de utilizare.

1.4 Acest standard internațional a fost elaborat în conformitate cu principiile de standardizare recunoscute la nivel internațional stabilite în Decizia privind principiile pentru elaborarea standardelor internaționale., Orientări și recomandări emise de Comitetul pentru bariere tehnice în calea comerțului al Organizației Mondiale a Comerțului.

Distribuie aceasta postare