Semnificație și utilizare
5.1 Metoda de testare a fost dezvoltată inițial în scopuri de cercetare și dezvoltare; in orice caz, în specificațiile materiale specifice, it is referenced to evaluate production materials (see section 14 on accuracy and deviation).

5.2 Using this test method can effectively predict the spalling corrosion behavior of these alloys in various types of outdoor services, especially in Marine and industrial environments. The four-test solution is highly corrosive and represents a more stringent type of environmental service, and certainly does not include unusual chemicals that are unlikely to be encountered in the natural environment.

5.3 Exfoliation grades were chosen arbitrarily in this test to illustrate the wide range of resistance to exfoliation. in orice caz, it remains to be determined whether a correlation can be established between EXCO test ratings and the actual conditions of use for a given alloy. The Aluminium Alloy Peeling Corrosion Working Group (G01.05.02.08) is conducting an activity to conduct outdoor exposure testing for this purpose. De exemplu, it has been reported that Al-Zn-Mg-Cu alloy samples rated EA or P in the 48-hour EXCO test did not experience more than a small amount of early peeling (EA) during six to nine years of exposure to the coastal atmosphere, while in most cases ED grade materials showed significant peeling within a year in the coastal atmosphere. It is expected that more comparisons will be provided as outdoor testing expands.

Metoda de testare ASTM G34-2020 pentru coroziune ciclică termică umedă

Rază
1.1 This test method covers a constant immersion exfoliation corrosion (EXCO) test procedure for high strength 2XXX and 7XXX series aluminum alloys.

Notă 1: This test method was originally developed for research and development purposes; in orice caz, în specificațiile materiale specifice, it is referred to as applicable for evaluating production materials (see section 14, “Accuracy and Deviation”).

1.2 This test method is applicable to all forged products, such as sheets, plates, extrusions and forgings produced by conventional ingot metallurgy processes.

1.3 The test method can be used on any form of sample or part that can be immersed in the test solution.

1.4 Acest standard nu este destinat să abordeze toate preocupările legate de siguranță, dacă există, asociat cu utilizarea acestuia. Este responsabilitatea utilizatorilor acestui standard să stabilească siguranța corespunzătoare, practicile de sănătate și de mediu și pentru a determina aplicabilitatea restricțiilor de reglementare înainte de utilizare.

1.5 Acest standard internațional se bazează pe principiile de standardizare recunoscute la nivel internațional stabilite în Decizia privind principiile pentru elaborarea standardelor internaționale., Orientări și recomandări emise de Comitetul OMC privind barierele tehnice în calea comerțului.