Industrial drying box is a kind of equipment for drying, curing, drying and other operations of large quantities of materials. It usually has a large studio volume and a high power heating system that can quickly and evenly transfer heat to the surface of the material for fast and efficient drying and handling.

Common problems and solutions
1, the temperature control is unstable

Solution: Check the working status of the temperature controller and the position of the sensor to find whether the controller or sensor is faulty or needs to be replaced. The problem can be solved by replacing or repairing the relevant parts, or readjugating the temperature control parameters.

2, the temperature is too high or too low

Solution: Check whether the heating power of the device meets the requirements and whether the heating component is faulty or needs to be replaced. You can adjust the heating power and temperature of the device, or replace the heating components as required.

3. Uneven heating

Solution: Check the working status and position of the heater to see if the position and heating time of the heater need to be re-adjusted so that the items in the equipment can be evenly heated.

4, overload or overheating protection triggered

Solution: Check whether the power supply voltage and ground cable of the device are normal, and find whether the heater or blower is faulty or needs to be replaced. Problema poate fi rezolvată prin înlocuirea sau repararea pieselor relevante, sau repoziționarea echipamentului.

5. Excessive noise

Solution: If the device makes too much noise, check whether the power voltage and ground cable of the device are normal, and find whether the heater or blower is faulty or needs to be replaced. Problema poate fi rezolvată prin înlocuirea sau repararea pieselor relevante, sau repoziționarea echipamentului.

The North and south tides remind you: industrial drying chambers need to be calibrated and maintained regularly. În același timp, este necesar să curățați în mod regulat interiorul echipamentului, verificați performanța și starea încălzitorului, controlor, senzor și alte echipamente, și înlocuiți sau reparați în timp util piesele defecte. în plus, se recomandă întreținerea dispozitivului în conformitate cu manualul de utilizare și ghidul de întreținere furnizat de producător pentru a asigura funcționarea stabilă pe termen lung a dispozitivului..

Industrial drying box common problems and specific solutions

Matters needing attention
In the process of using industrial drying chambers, de asemenea, trebuie să acordați atenție următoarelor puncte:

Arrange the position of the sample to ensure that the sample can be evenly heated and distributed.

Do not accumulate too much debris or samples inside the equipment, avoid

Equipment is overloaded or overheated, resulting in equipment damage or inaccurate test results. 3. Before using the equipment, it is necessary to preheat the equipment to ensure that the equipment can reach the required temperature.

According to the actual needs, the heating power and accuracy of the industrial drying oven are reasonably selected to avoid inaccurate test data due to equipment parameter mismatch.

În procesul de utilizare a echipamentului, the heating changes and test data are recorded in time, and analyzed and processed according to needs.

În scurt, the industrial drying oven is a commonly used drying equipment, and it is necessary to pay attention to the use and maintenance of the equipment during use to ensure the stability of the equipment and the accuracy of the test data. În același timp, it is necessary to follow the manufacturer’s instructions and maintenance instructions, and perform regular maintenance to ensure long-term reliable operation of the equipment.