Cutting Tester for Protective Gloves
This machine is used to test the strength of protective gloves and upper protection area.The cutting resistance of gloves or uppers is measured by cutting samples with a rotating circular cutter under a specified load.
- Descriere
- Anchetă
Descriere
Cutting tester for protective gloves,Uppers Cutting Resistance Tester
Scop
This machine is used to test the strength of protective gloves and upper protection area. The cutting resistance of gloves or uppers is measured by cutting samples with a rotating circular cutter under a specified load.
Cutting tester for protective gloves,Uppers Cutting Resistance Tester
Notă
This test should not be used on parts made of very hard materials such as chain mail.
Principiu
The sample is cut by a counter rotating circular blade which reciprocates under a specified load
According to the standard: The tester is designed and produced according to GB 24541-2009, EN388 standard
Cutting tester for protective gloves,Uppers Cutting Resistance Tester
Parametru tehnic
| Load weight | 5N±0.05N | Marime de mostra | 100mm*80mm |
| Blade size | Japan OLFA tungsten alloy steel blade Hardness 740HV-800HV φ45±0.5mm, thickness 0.3mm | Cutting stroke | 50mm |
| Cutting speed | 10cm/s(blade sine speed) | Tejghea | 1-99999 |
| Alimentare electrică | AC220V±10% 50Hz | Dimensiunea instrumentului | 550×400×250(L×L×A) |
| The weight of the instrument | 40KG |
Cutting tester for protective gloves,Uppers Cutting Resistance Tester
Configuration list:
host, 1 acrylic protective cover, 1 power cord, 2 blades, 10 pieces of filter paper, 1 roll of aluminum foil (20 meters), 5 pieces of cotton canvas.
Cutting tester for protective gloves,Uppers Cutting Resistance Tester
Scop
This machine is used to test the strength of protective gloves and upper protection area. The cutting resistance of gloves or uppers is measured by cutting samples with a rotating circular cutter under a specified load.
Cutting tester for protective gloves,Uppers Cutting Resistance Tester
Notă
This test should not be used on parts made of very hard materials such as chain mail.
Principiu
The sample is cut by a counter rotating circular blade which reciprocates under a specified load
According to the standard: The tester is designed and produced according to GB 24541-2009, EN388 standard
Cutting tester for protective gloves,Uppers Cutting Resistance Tester
Scop
This machine is used to test the strength of protective gloves and upper protection area. The cutting resistance of gloves or uppers is measured by cutting samples with a rotating circular cutter under a specified load
