Descriere

Tester HDT Vicat LR-A020(Controlul ecranului atins)

1.Introducerea Produsului：

Deformare termica Vicat, Softening Point Temperature Tester is using PLC programmable controller temperature adjustment using touch screen operation.The product is simple to operate, ușor de folosit, performanță stabilă, high precision products, and in the test process can be real-time monitoring of the test temperature and deformation;The system automatically stops heating at the end of the test.This series of models is the quality inspection units, colleges and universities and enterprises to check the necessary instruments.

2.Caracterul produsului:

This machine is mainly used for measuring the thermal deformation temperature and veka softening point temperature of non-metallic materials such as plastic, cauciuc, nylon and electrical insulating materials.

3.Standard de testare：

• GB／T1633《Determinarea temperaturii de înmuiere vika (VST) din termoplastic》
• GB／T1634《Determinarea temperaturii de deformare a sarcinii plastice – parte 1: metoda generala de testare》
• GB/T8802《Determinarea temperaturii de înmuiere a fitingurilor din plastic》
• IS075-2013《Măsurarea temperaturii de deformare a sarcinii plastice》
• ASTM D 648《Metoda de testare pentru temperatura deformarii termice plastice》
• ASTM D 1525《Plastic Vicat softening test method.

Tester HDT Vicat LR-A020(Controlul ecranului atins)

4.Product Advantage

• Ø Intelligent PID regulation, accurate heating rate, accurate temperature control and no difference
• Ø Can perform thermal deformation test of a variety of standard splines
• Ø Can perform vicar softening point test of a variety of standard splines
• Ø Can simultaneously perform thermal deformation and Vicar softening point test
• Ø Calculates the required load automatically based on the test standard and spline size
• Ø Selects two heating rates, free switch and simple operation
• Ø Tests completes or exceeds the temperature upper limit and switches off the temperature control
• Ø Has both software overtemperature protection and external mechanical overtemperature protection to facilitate testing.

Tester HDT Vicat LR-A020(Controlul ecranului atins)

5.Specificație tehnică：

• Interval de control al temperaturii：Temperatura normală - 300℃
• Viteza de incalzire：（120±10）℃/h (12±1)℃/6min

(50±5)℃/h (5±0,5)℃/6min

• Eroare de indicare a temperaturii：1℃
• Precizia controlului temperaturii：±0,5℃
• Eroare de indicare a deformarii maxime：±0,001 mm
• Domeniul de măsurare a deformării：0— 2 mm
• Numărul de cadre de probă：3buc
• Încărcați greutatea tijei și a tăvii：68g
• Test span range: according to the standard 64 or 100mm
• Mediu de încălzire: ulei de metil silicon sau ulei de transformator
• Metoda de răcire: mai mult decât 150 răcire naturală, 150 sub apă sau răcire naturală
• Putere de incalzire：4kw