The interlayer bonding strength meter is also of great application value in the manufacture and use of yarn tube paper. Yarn-tube paper is a special paper product, which is mainly used in the processing and transportation of textiles in the textile industry. It has the advantages of light, soft and good moisture absorption. The internal bonding force tester can help manufacturers and users understand the internal bonding strength of yarns, thus improving the quality and reliability of yarns.

In the application of yarn paper, the internal bonding force tester can be used to test the bonding strength between different layers, as well as the overall bonding strength of the board. Prin testarea rezistenței de legare internă a diferitelor procese și materii prime, manufacturers can identify better production processes and raw materials to produce better yarn paper. în plus, the internal bonding force tester can also help manufacturers and users understand the internal bonding strength of yarn paper under different humidity and temperature conditions, thus determining its scope of application and service life.

Yarn-tube paper for application of interlayer bonding strength meter

În procesul de testare, similar to the test of electrical cardboard, electrical insulating cardboard and paper tube paper, it is necessary to prepare the test sample first, place it on the test bench, adjust the test parameters and start the test. După finalizarea testului, the internal bond strength of the yarn paper can be evaluated according to the test results, astfel încât să îmbunătățească calitatea și fiabilitatea produsului.

Metoda de detectare
The following are the specific test steps of the internal bonding force tester in the detection of yarn tube paper:

Pregătiți proba de testare: Cut a sample of a certain size from the yarn paper, în general dreptunghiular sau pătrat, dimensiunea și forma trebuie să îndeplinească cerințele de testare.

Instalați proba de testare: Place the test sample on the test bench of the internal bonding force tester, align and clamp it to ensure that the sample is fixed.

Adjust the test parameters: according to the test requirements, adjust the test parameters of the internal bonding force tester, cum ar fi viteza de testare, pressure range, etc.

Începeți testul: start the internal bonding force tester and start the test. When tested, the instrument will apply gradually increasing pressure until separation occurs between the different layers. În timpul testului, the pressure value and test time can be recorded for subsequent analysis.

Yarn-tube paper for application of interlayer bonding strength meter

Analysis of test results: După finalizarea testului, the internal bond strength of the yarn tube paper can be evaluated according to the test results. If the test results meet the requirements, the internal bond strength of the yarn paper can be guaranteed, thus improving the quality and reliability of the product.

Marea Nord și Sud vă amintesc: the yarn paper is usually soft and flexuous, so special attention should be paid to the clamping method of the sample and the stress distribution during the test. în plus, the yarn paper also has moisture absorption and expansion, temperature and humidity and other environmental conditions need to be controlled during the test to ensure the accuracy and reliability of the test results.