ASTM D6801-2015 Стандартный метод испытаний для измерения максимальной температуры самонагрева произведений искусства и других материалов

Значение и использование

5.1 Этот метод испытаний обеспечивает тенденцию к ускорению самовозгорания материала., which can eventually lead to a fire. Suitable for liquids and pastes.

5.2 The spontaneous heating behavior of oil-based materials is affected by the availability of oxygen, the amount of desiccant present, the degree of polymerization of the oil, the surface area of the cellulosic material, the measures taken to prevent heat dissipation, and the amount of oil in contact with the cellulosic material. The degree of spontaneous heating is independent of the type of cellulosic material in contact with the oil-based material or whether the oil-immersed material is first air-dried. Small amounts of contaminants, например, краска, quartz powder, грязь, or desiccant (например, materials that may be found on dirty, oil-soaked rags), can act as catalysts for this reaction.

ASTM D6801-2015 Стандартный метод испытаний для измерения максимальной температуры самонагрева произведений искусства и других материалов

Шаг 1: Объем

1.1 The test method includes a small-scale laboratory procedure to determine the self-heating tendency of oil-based materials exposed to high temperatures in air in a controlled semi-adiabatic system.

1.2 This test method was developed to address the urgent need to identify oil-based materials that may need to be labeled with a tendency to self-heating. Research based on this test method could allow the development of practices to identify such oil-based materials.

1.3 Значения, выраженные в единицах СИ, следует рассматривать как стандартные значения.. Значения, указанные в скобках, предназначены только для справки..

1.4 Настоящий стандарт не предназначен для решения всех проблем безопасности., если таковые имеются, связанный с его использованием. Пользователи настоящего стандарта обязаны установить соответствующие правила техники безопасности и охраны труда, а также определить применимость нормативных ограничений перед использованием.. Refer to Appendix X1 for specific safety issues related to the treatment of solvent-impregnated rags.

Поделиться этой записью