7006-27C-1 Указатель высоты пайки патрона лампы
- Описание
- Расследование
Описание
7006-27C-1 Указатель высоты пайки патрона лампы
7006-27C-1 Cap solder height gauge Thread gauge Go for S1 dimension gauge
E27 Lamp holder gauge name
Соответствовать стандарту: МЭК 60061; GB1483.1
Product category:
E27 Lamp holder gauge Pass Gauge 7006-27B-1
E27 Screw cap gauge Stop 7006-28A-1
E27 Lamp holder Solder Height Gauge 7006-27C-1
E27 Screw cap Contact performance Gauge 7006-50-1
E27 Lamp holder Anti-accidental contact gauge (anti-electric shock) 7006-51A-2
The gauge plug is shown in inspection condition. When the plunger is at rest, fac
e W should be indented more deeply than face X.
| Ссылка | Измерение(мм) |
| |
| д | 26.45 | +0.03/-0.0 | |
| ЧАС | 14 | ±0,1 | |
| М | 13 | ±0,1 | |
| О | 23.0 | ±0.03 | |
| С | 8.5 | +0.01/-0.0 | |
| В | 1.5 | +0.02/-0.0 |
7006-27C-1 Cap solder height gauge Thread gauge Go for S1 dimension gauge Lamp holder gauge
Цель:
To check the dimensions S1 minimum and S1 maximum of E27 caps on finished lamps.
7006-27C-1 Cap solder height gauge Thread gauge Go for S1 dimension gauge Lamp holder gauge
Тестирование:
When the cap on a finished lamp has been pushed into the gauge as far as it will go, the plunger surface “Вт” shall be co-planar with or project beyond surface “Икс” but it shall not project beyond surface “Да”.
7006-27C-1 Cap solder height gauge Thread gauge Go for S1 dimension gauge Lamp holder gauge
Цель:
To check the dimensions S1 minimum and S1 maximum of E27 caps on finished lamps.
