ASTM D3574 ISO 2439 Sponge Compression Fatigue Hardness Testing Machine
- Описание
- Расследование
Описание
ASTM D3574ISO 2439 Sponge Compression Fatigue Hardness Testing Machine
Стандарты:
GB/T10807-89;ИСО 2439-1980;JISK6401;АСТМ Д3574;КАК 2282.8 Method A-IFD Test.
ASTM D3574ISO 2439 Sponge Compression Fatigue Hardness Testing Machine
Product Application:
Sponge /foam indentation hardness testing machine is also known as sponge, foam indentation hardness testing machine, tensile metallic and non-metallic, полимерные материалы, сжатие, изгиб, detection of low cycle fatigue and other projects can be according to customer product requirements according to GB, ИСО, АСТМ, ОН, EN and other standards for the preparation, to automatically strike the biggest test, прочность на излом, предел текучести, предел прочности, прочность на сжатие, предел прочности при изгибе, модуль упругости, удлинение , постоянное напряжение удлинения, elongation and other parameters given stress.
ASTM D3574ISO 2439 Sponge Compression Fatigue Hardness Testing Machine
Главная особенность:
1.Automatic counting, automatic indentation of 80,000 times to stop there Pause
2. High precision pressure sensors and large-scale integrated circuits, accurate determination.
3. Can always manually adjust indentation load, to keep it at 750 Ньютон
ASTM D3574ISO 2439 Sponge Compression Fatigue Hardness Testing Machine
Спецификация:
Sensing method | Force sensor automatic dispaly |
Load Cell Capacity | 300Кг |
Мотор | Servo motor control system |
Unit switch | Кг,Н,Lb |
Точность | 0.5 оценка(±0,5%) |
Testing stroke | 200мм |
Тест скорости | 100±20mm/min |
Size of upper compressing plate | Diameter 200mm |
Bottom Border-radius | R1mm |
Lower platform | 420mmx420mm |
Air hole diameter | 6.0мм |
Hole center gap | 20мм |
Размер образца | (380+10)mmx(380+10)mmx(50±3)мм |
Власть | 220 В переменного тока |