Тестер для резки защитных перчаток

This machine is used to test the strength of protective gloves and upper protection area.The cutting resistance of gloves or uppers is measured by cutting samples with a rotating circular cutter under a specified load.

Описание

Cutting tester for protective gloves,Uppers Cutting Resistance Tester

Цель
This machine is used to test the strength of protective gloves and upper protection area. The cutting resistance of gloves or uppers is measured by cutting samples with a rotating circular cutter under a specified load.

Cutting tester for protective gloves,Uppers Cutting Resistance Tester
Примечание

This test should not be used on parts made of very hard materials such as chain mail.
Принцип
The sample is cut by a counter rotating circular blade which reciprocates under a specified load
По стандарту: The tester is designed and produced according to GB 24541-2009, EN388 standard

Cutting tester for protective gloves,Uppers Cutting Resistance Tester
Технический параметр

Load weight5N±0.05NРазмер образца100mm*80mm
Blade sizeJapan OLFA tungsten alloy steel blade
Hardness 740HV-800HV
φ45±0.5mm, thickness 0.3mm
Cutting stroke50мм
Cutting speed10cm/s(blade sine speed)Прилавок1-99999
Источник питанияAC220V±10% 50HzРазмер инструмента550×400×250(Д×Ш×В)
Вес инструмента40КГ

Cutting tester for protective gloves,Uppers Cutting Resistance Tester

Список конфигурации:
хозяин, 1 acrylic protective cover, 1 power cord, 2 лезвия, 10 pieces of filter paper, 1 roll of aluminum foil (20 метры), 5 pieces of cotton canvas.

Cutting tester for protective gloves,Uppers Cutting Resistance Tester

Цель
This machine is used to test the strength of protective gloves and upper protection area. The cutting resistance of gloves or uppers is measured by cutting samples with a rotating circular cutter under a specified load.

Cutting tester for protective gloves,Uppers Cutting Resistance Tester
Примечание

This test should not be used on parts made of very hard materials such as chain mail.
Принцип
The sample is cut by a counter rotating circular blade which reciprocates under a specified load
По стандарту: The tester is designed and produced according to GB 24541-2009, EN388 standard

Cutting tester for protective gloves,Uppers Cutting Resistance Tester

Цель
This machine is used to test the strength of protective gloves and upper protection area. The cutting resistance of gloves or uppers is measured by cutting samples with a rotating circular cutter under a specified load

Тестер для резки защитных перчаток






    добавлен в вашу корзину:
    Проверить