Вискозиметр Кребса Ку Штормера STM-2T ASTM D562
- Описание
- Расследование
Описание
Вискозиметр Кребса Ку Штормера STM-2T ASTM D562
1.Мвсе особенности:
1.Интерфейс работы прост и понятен, and the viscosity test can be done quickly and conveniently through the creation of test program and data analysis;
2.Viscosity measurement accuracy: automatic calibration by computer, высокая точность, небольшая ошибка;
3.The display rich content: in addition to KU, г, CP of the three commonly used parameters, and temperature measurements for the full-scale value percentage (графика), viscosity curve, сигнализация переполнения диапазона, timing, clock date, и т. д.;
4.Timing measurement: very practical. We measured the paint, чернила, paint is a typical non Newtonian fluid, the viscosity and temperature on the outside (except the temperature rise, but also with the decrease of viscosity) measurement time length. The paint has ink and paint is shear thinning characteristics, the longer the time of measurement of viscosity the smaller, if the viscosity of samples of the same class are comparable, the measurement time must be the same;
Вискозиметр Кребса Ку Штормера STM-2T ASTM D562
5.USB-интерфейс,insert U disk to copy measurement data directly(optional)
6.Self built 30 sets of test procedures: can be compiled, can quickly call;
7.Access to 30 sets of measurement data and curves; stored in the viscometer, the data include sample name, КУ, г, CP value, measurement date, и т. д.;
8.The real-time display of the viscosity curve: on the screen at any time watch;
9.Can connect micro printer and computer: there are two interfaces, serial connection computer, parallel port connection printer;
10.The front level: the rotor is vertically placed in the sample, it is important to the accuracy of measurement data. Through the observation level in front of the three foot level, which can conveniently adjust the base level of the bubble will be adjusted to the middle position (the current domestic Stormer viscometer on the market are not level regulating device);
11.Богатые дополнительные аксессуары: датчик температуры, viscometer thermostat, чашка с постоянной температурой, принтер, образец стандартной вязкости, и т. д.;
Вискозиметр Кребса Ку Штормера STM-2T ASTM D562
модель | STM-2T |
Контроль / Режим отображения | 5 дюймовый цветной сенсорный экран |
скорость(об/мин) | 200±0,1 |
диапазон измерения | 40.2KU – 141.0KU 32g – 1099g 27 – 5250CP |
Точность измерения | ±3% |
measurement reproducibility | ±1,5% |
Measuring container | 1 pint |
timing | Flexible setting according to sample situation |
измерение температуры | Стандартный интерфейс датчика температуры (need to match temperature probe) |
Self built measurement procedure | Can save 30 sets (including sample, время измерения, дата) |
Сохраните результаты измерений | 30 наборы данных (including KU, г, КП, время, кривые, и т. д.) can be saved |
viscograph | Real time display viscosity curve |
Распечатать | Данные, curves can be printed (need to choose printers) |
интерфейс вывода данных | USB-интерфейс: вставьте U-диск, чтобы скопировать данные напрямую (необязательный) RS232 interface: connectable computer |
Thermostatic unit | Параметры (including special viscometer thermostatic bath, термостатическая чашка) |
рабочий блок питания | 110В / 60Hz or 220V / 50Гц |
контурный размер | 300 × 300 × 450(мм) |