Описание

Вискозиметр Штормера СТМ-2Т

Мвсе особенности：

1.Интерфейс работы прост и понятен, and the viscosity test can be done quickly and conveniently through the creation of test program and data analysis;

2.Viscosity measurement accuracy: automatic calibration by computer, высокая точность, небольшая ошибка;

3.The display rich content: in addition to KU, г, CP of the three commonly used parameters, and temperature measurements for the full-scale value percentage (графика), viscosity curve, сигнализация переполнения диапазона, timing, clock date, и т. д.;

4.Timing measurement: very practical. We measured the paint, чернила, paint is a typical non Newtonian fluid, the viscosity and temperature on the outside (except the temperature rise, but also with the decrease of viscosity) measurement time length. The paint has ink and paint is shear thinning characteristics, the longer the time of measurement of viscosity the smaller, if the viscosity of samples of the same class are comparable, the measurement time must be the same;

5.USB-интерфейс,insert U disk to copy measurement data directly（optional）

6.Self built 30 sets of test procedures: can be compiled, can quickly call;

7.Access to 30 sets of measurement data and curves; stored in the viscometer, the data include sample name, КУ, г, CP value, measurement date, и т. д.;

8.The real-time display of the viscosity curve: on the screen at any time watch;

9.Can connect micro printer and computer: there are two interfaces, serial connection computer, parallel port connection printer;

10.The front level: the rotor is vertically placed in the sample, it is important to the accuracy of measurement data. Through the observation level in front of the three foot level, which can conveniently adjust the base level of the bubble will be adjusted to the middle position (the current domestic Stormer viscometer on the market are not level regulating device);

11.Богатые дополнительные аксессуары: датчик температуры, viscometer thermostat, чашка с постоянной температурой, принтер, образец стандартной вязкости, и т. д.；

STM-2T Stоrmer viscometer is widely used to determine the paint, чернила, paint or other KU values to represent the viscosity of the industry, in line with international standards ASTM, D562 and GB9296 and other related standards.

Вискозиметр Штормера СТМ-2Т

Дetailed Ттехнический ппараметры: