Камера термического удара/Шоковая камера горячей и холодной температуры LR-TC-80
- Описание
- Расследование
Описание
Thermal Shock Chamber/Hot Cold Temperature Shock Chamber
Область применения
This series of cold and heat shock test box is suitable for alternating shock test of electrical and electronic products and electronic parts.
Применимые стандарты
Products can meet CNS, MIL, МЭК, ОН, GB/T2423.5-1995, GJB150.5-87 and other standards
Control mode of cold and hot impact test chamber:
The low temperature and high temperature storage tank is used to open the valve according to the action, and the low temperature and high temperature are quickly sent to the test tank through the air supply system, so as to achieve the rapid temperature impact effect, balance the temperature control system (BTC) + specially designed air supply circulation system, P.I.D.SSR is controlled in such a way that the heat added to the system is equal to the heat loss, so that it can be used stably for a long time.
Thermal Shock Chamber/Hot Cold Temperature Shock Chamber
Спецификация
Temperature shock range | High temperature 60℃～+150℃ Низкая температура -55℃～-10℃ |
Preheating temperature range | ＋60℃ ～ ＋180℃ |
High temperature tank heating time | РТ～ ＋180℃≤35мин（RT 10～＋30℃）. |
Pre-cooling temperature range | －10℃～－65℃ |
Cooling time of cryogenic tank | РТ～ -65℃≤50мин |
Колебания температуры | ±1.0℃ |
Равномерность температуры | ±2.0℃ |
Impact recovery time | －55– ＋150℃≤5мин. |
Thermal Shock Chamber/Hot Cold Temperature Shock Chamber
| Внутренний размер | W500×H400×D400 mm |
| Inner box material | Fogged stainless steel plate（СУС#304） |
| Outside material | Sand-lined stainless steel plate（СУС#304） |
| Heat preservation material | a.High temperature tank: aluminum silicate insulation cotton. b.Low temperature tank: HIGH density PU foam |
| Chamber door | Upper and lower monolithic doors, open on the left. А. Embedded flat handle. Б. after button: SUS# 304. С. Silicone foam rubber strip. |
| Testing rack | А. The load bearing shall not be more than 5KG. Б. Stainless steel SUS#304 inner case. |
| Отопительная система | Finned radiator type stainless steel electric heater. 1. High-temperature tank 6 КВт. 2. Low temperature tank 3.5KW. |
| Air circulation system | 1. 1HP×2 motors. 2. Stainless steel extension shaft. 3. SIROCCO FAN. 4. Specially designed fan forced air circulation system. |
