Галогенный анализатор влажности — это широко используемый прибор для измерения содержания влаги в образце..

The following is a detailed introduction to the halogen moisture meter:

Как это работает
The working principle of the halogen moisture meter is based on halogen lamp technology. The instrument uses heat energy radiated by heating and a halogen lamp to evaporate the water in the sample and measure the amount of water evaporated, thereby determining the moisture content in the sample. The light emitted by halogen lamps has high energy and can accelerate the evaporation process of water.

Что такое галогенный влагомер, прочтите эту статью, достаточно

Метод работы
В общем, the operation of moisture measurement using halogen moisture meter is as follows:

Prepare the instrument: Connect the halogen moisture meter to the power supply and turn on the switch to ensure the instrument is ready.

Базовые приготовления: Place the sample to be tested in the sample container and record the mass or volume of the sample.

Placement of the sample: Place the container containing the sample in the measuring chamber or sample compartment of the instrument, ensuring good contact with the instrument.

Установить параметры: according to the characteristics of the sample, set the appropriate heating temperature, heating time and other parameters.

Start measurement: By pressing the start button or initiating the corresponding operation of the measurement process, the instrument will perform the heating and moisture measurements.

Display results: After the measurement is completed, the instrument will display the results of the measured moisture content.

Что такое галогенный влагомер, прочтите эту статью, достаточно

Примечания
The following matters should be noted when using halogen moisture meter:

Operate and handle the instrument correctly according to instrument requirements and guidelines to ensure accurate measurement results.

Во время операции, follow the safe operation guide of the instrument, especially the safety precautions related to the heating components.

The sample container should be clean, dry, and in good contact with the instrument to ensure the accuracy of the measurement.

Attention needs to be paid to the nature and condition of the samples, and some samples may need to be pretreated or other measurement methods selected.

Что такое галогенный влагомер, прочтите эту статью, достаточно

Field of application
Halogen moisture meters are widely used in many fields, including but not limited to:

Пищевая промышленность и напитки: used to measure the moisture content of food, зерно, кофе, чай, молочные продукты, fruit and vegetable samples.

Chemical and pharmaceutical industry: used to measure the moisture content of chemical reagents, наркотики, apis, solvents and other samples.

Building materials and pulp industry: used to measure moisture content in concrete, гипс, бумага, pulp and other materials.

Мониторинг окружающей среды: used to measure moisture content in soil, Сточные Воды, waste and other samples.

Что такое галогенный влагомер, прочтите эту статью, достаточно

Стандарт ссылки
The use of halogen moisture meter can refer to the following standards or methods:

ASTM D644: Standard Test Method for Moisture Content of Paper and Paperboard by Oven Drying.

ИСО 287: Бумага и картон — Determination of moisture content of a lot — Oven drying method.

ГБ/Т 1037: Determination of moisture content of paper, доска, and pulp.

AOAC Official Method 934.01: Moisture in Foods.

USP General Chapter &лт; 921&гт; Water Determination.

It should be noted that the specific reference standards may vary depending on the samples tested and the required industry regulations. Поэтому, in specific applications, the applicable standards or methods should be selected according to the tested samples and industry requirements.