Может быть много причин, по которым децентрализованная машина не работает.. Here are some common reasons and solutions:

Power failure: First check whether the power supply is normally supplied, check whether the power plug and socket are firmly connected, and ensure that the power line is not faulty.

Отказ двигателя: If the motor fails, it may be caused by motor damage, winding circuit breakage, stator coil short circuit, и т. д.. This situation requires contacting professional maintenance personnel for repair or replacement of the motor.

По какой причине в дисперсионной машине не включается электричество??

Circuit fault: Check whether the control circuit of the disperser is normal. May be control switches, fuses, relays and other circuit components failure caused. Faulty circuit elements need to be checked and repaired or replaced.

Mechanical failure: The disperser may have the failure of mechanical parts, such as bearing damage, transmission belt fracture, и т. д.. This situation requires inspection and repair or replacement of mechanical components.

Защита от перегрузки: The disperser may be equipped with overload protection device, which will automatically stop in case of overload to protect the motor. If the load of the disperser is too large when it is running, the overload protection device may be triggered, causing the motor to stop running. It is necessary to reduce the load or adjust the parameters of the disperser to avoid overload.

If the above methods cannot solve the problem, it is recommended to contact professional maintenance personnel or manufacturers for overhaul and maintenance. В то же время, the operation rules should be followed when using the disperser to ensure the normal operation and safety of the equipment.