Главна сврха УВ тестирања електронских компоненти на старење је да се процени њихова отпорност на временске услове, reliability and performance stability to determine their service life and performance performance in outdoor or exposed environments. Uv aging tests can simulate UV radiation in sunlight, as well as other environmental factors on electronic components.

Assess weather resistance: Electronic components are often exposed to outdoor environments and are affected by factors such as UV rays, temperature changes, влажност, and atmospheric chemicals. Uv aging tests can simulate these factors to evaluate the weatherability of electronic components under actual conditions of use.

Assessing reliability: The reliability of an electronic component refers to its ability to maintain the desired performance under specific environmental conditions. Through UV aging test, the stability and reliability of electronic components can be evaluated to know whether their performance degradation, damage or failure will occur in long-term use.

Evaluate performance stability: UV radiation can have adverse effects on the materials and structures of electronic components, such as material aging, color fading, and changes in electrical properties. Through UV aging tests, the performance stability of electronic components under UV radiation can be evaluated to determine that they can maintain the desired performance during their service life.

Примена коморе за испитивање старења УВ лампе у електронским компонентама

Guide product improvement and development: Through the results of UV aging tests, it is possible to understand the performance changes of electronic components under UV radiation, so as to guide the improvement and development of products and improve their weather resistance and reliability.

Through UV aging tests, important information about the weather resistance, reliability, and performance stability of electronic components in exposed environments can be provided. This helps manufacturers design and produce electronic products that are more durable and reliable, and ensure that they can work safely and reliably in a variety of environmental conditions.

Примена коморе за испитивање старења УВ лампе у електронским компонентама

Industry standards
The UV aging test of electronic components usually requires reference to the following industry standards:

ИЕЦ 60068-2-5: International Electrotechnical Commission (ИЕЦ) standard for heat and hygrothermal testing of electronic equipment. Парт 5 of these involves UV radiation tests under solar radiation.

ASTM G154: American Society for Materials and Testing (АСТМ) standard for UV Radiation Testing of Nonmetallic Materials. It is suitable for evaluating the weather resistance and performance stability of materials.

JIS C 60068-2-5: Japanese Industrial Standard for heat and damp heat resistance tests of electronic equipment. Делови 2-5 of these relate to UV radiation tests under solar radiation.

MIL-STD-810: A US military standard covering the methods and requirements for testing electronic equipment under a variety of environmental conditions, including testing for ultraviolet radiation.

ГБ/Т 2423.24: Chinese national standard for environmental test methods for electrical and electronic products. Парт 24 of these involves UV radiation tests.

Примена коморе за испитивање старења УВ лампе у електронским компонентама

These standards provide guidance and specifications for UV aging tests, including requirements for test equipment, методе испитивања, test conditions and duration. Depending on the specific application and requirements, other specific industry standards or internal company specifications can also be referred to.

Application Cases
The following are some specific application cases of UV aging test for electronic components:

LED components: UV aging tests are performed on leds (light emitting diodes) and related components to evaluate their stability, brightness attenuation, and color change in outdoor environments.

Solar cell modules: UV aging tests were performed on solar cell modules to evaluate their performance stability and weather resistance under long-term exposure to solar radiation.

Plastic packaged elements: UV aging tests are performed on plastic packaged elements used in electronic devices to evaluate their weather resistance, color stability, and mechanical strength under UV radiation.

Printed circuit Board (PCB) : UV aging tests are performed on PCBS and their circuit components to evaluate their weather resistance, electrical stability, and contact corrosion in outdoor or exposed environments.

Cables and connectors: UV aging tests are performed on cables and connectors to evaluate their weather resistance, stability of electrical performance, and connection reliability in outdoor environments.

These application cases are only a part of the UV aging test of electronic components, and the practical application can be more customized and expanded according to different electronic devices and specific requirements. Uv aging tests help to evaluate the weather resistance and reliability of electronic components in exposed environments, providing important performance information to guide product improvement and development to ensure that electronic devices can work safely and reliably under various environmental conditions.

Примена коморе за испитивање старења УВ лампе у електронским компонентама

Method of operation
The following are the steps and precautions for testing the aging resistance of electronic components using UV aging test chamber in general:

Припрема узорка: According to standards or requirements, select appropriate size samples of electronic components for testing. Ensure samples comply with relevant specifications and requirements.

Test condition setting: according to the required test conditions and standard requirements, set the parameters of the UV aging test chamber, including radiation intensity, температура, влажност, итд. Be careful to set correctly according to standards or requirements.

Sample placement: Place the electronic component samples on the sample rack inside the test chamber to ensure that the samples are in the right position and to avoid mutual interference between the samples.

Test run: Start the UV aging test chamber and expose the sample to UV radiation under the set conditions. According to the standard requirements, set the appropriate test time, usually hundreds to thousands of hours.

Regular observation: Regularly observe the changes of the sample, including appearance, боја, size, electrical properties, итд. Record any visible changes or damage.

End of test and evaluation: Upon completion of the test, samples were removed for evaluation and testing. The physical and electrical properties of electronic components can be tested to determine their aging resistance.

Примена коморе за испитивање старења УВ лампе у електронским компонентама

When conducting UV aging test, the following matters should also be noted:

Ensure that the equipment of the UV aging test chamber is working properly, and operate according to the operation manual and safety requirements.

Check and record the temperature, влажност, radiation intensity and other parameters of the test chamber to ensure its stability and accuracy.

Ensure sample selection, preparation and placement in accordance with standards and requirements.

Check and maintain test chamber equipment regularly to ensure its normal operation and accuracy.

Take care to observe and record any changes in the sample during the test for subsequent evaluation and analysis.

Please note that the exact test methods and operating procedures may vary according to the standards and specific test requirements, so read the relevant standards carefully and follow the correct test procedures before performing UV aging tests.