ASTM B499 Standard test Method for Measuring Coating Thickness by Magnetic Method: Non-magnetic Coatings on Magnetic Metals includes non-destructive measurement of the thickness of non-magnetic coatings on black or other magnetic base metals using a magnetic instrument.
Значење и употреба

5.1 The thickness of the coating is generally important to its performance. For most non-ferrous coatings on steel, the magnetic method is reliable for non-destructively measuring coating thickness and is suitable for specification acceptance testing and SPC/SQC applications.

5.2 This test method should not be used to determine the thickness of electrodeposited nickel coatings on steel. Test method B530 is suitable for this determination.

ASTM B499-2014 Standard Test Method for Magnetic Measurement of Coating Thickness: Non-magnetic Coatings on Magnetic Metals

Корак 1: Обим

1.1 This test method includes the non-destructive measurement of the thickness of a non-magnetic coating on a black or other magnetic base metal using a magnetic instrument. It is intended to complement the manufacturer’s instructions on the operation of the instrument, not to replace them.

Белешка 1 – Nickel-Phosphorus alloys with self-catalytic deposition containing more than 8% phosphorus measured by this test method are sufficiently non-magnetic as long as they are measured prior to any heat treatment.

1.2 These instruments measure the magnetic attraction between the magnet and the base metal, which is affected by the presence of a coating (classified as “magnetic pull off”) or by changes in the magnetic flux density within the probe (classified as “electron”). These instruments cannot distinguish the thickness of individual layers. They can only measure the cumulative thickness of all layers below the probe, down to the base metal.

1.3 Measurements made in accordance with this test method shall comply with the requirements of ISO International Standard 2178, printed in 1982.

1.4 Вредности изражене у СИ јединицама сматрају се стандардним. Вредности дате у заградама су само за референцу.

1.5 Овај стандард није намењен да реши све безбедносне проблеме (ако их има) повезана са његовом употребом. Одговорност корисника овог стандарда је да успоставе одговарајуће безбедносне и здравствене праксе и да утврде применљивост регулаторних ограничења пре употребе.