ASTM F2013-10 (2016) Standard Test Method for Determination of acetaldehyde Residues in polyethylene terephthalate Bottle Polymers Using an Automatic Static Headspace Sampling Device and Capillary Gas Chromatograph with a Flame Ionization Detector is especially used as a quality control tool for molding or synthesis operations.

Значење и употреба

5.1 This test method is especially used as a quality control tool for molding or synthesis operations. Acetaldehyde is a volatile degradation product produced during PET melting processing. As a result, it is captured in the side wall of the molded product and slowly desorbed into the contents packaged therein. In some foods and beverages, AA can give off an undesirable taste, so it is important to understand its concentration in PET products used in food contact applications.

ASTM F2013-2016 Standard Test Method for Determination of Residual Acetaldehyde in Polymers from polyethylene terephthalate Bottles Using an Automatic Static Headspace Sampling Device and Capillary Gas Chromatograph with Flame Ionization Detector

5.2 Desorption conditions at 150°C for 60 minutes should ensure that no measurable AA is produced in the sample during desorption.

Корак 1: Обим

1.1 This test method covers gas chromatography for the determination of ppm residual acetaldehyde (AA) in polyethylene terephthalate (PET) homopolymers and copolymers used in beverage bottle production. This includes sample types for amorphous and solid particle samples and billet samples, as opposed to bottling tests (test method D4509), which require 24 hours of desorption into the top space of the bottle at 23°C before concentration. Headspace was quantified by a similar GC method.

1.2 Values expressed in SI units shall be regarded as standard values. This standard does not include other units of measurement.

1.3 Овај стандард нема за циљ да одговори на све безбедносне проблеме повезане са његовом употребом. It is the responsibility of the user of this standard to establish appropriate safety and health measures prior to use and to determine the applicability of regulatory restrictions.

ASTM F2013-2016 Standard Test Method for Determination of Residual Acetaldehyde in Polymers from polyethylene terephthalate Bottles Using an Automatic Static Headspace Sampling Device and Capillary Gas Chromatograph with Flame Ionization Detector

2. Погледајте фајл

АСТМ стандард

D4509 Test method for the determination of acetaldehyde content in the 24-hour gas (AIR) space in newly blown PET bottles

Е691 Пракса спровођења међулабораторијских студија ради утврђивања тачности метода испитивања