предговор

ИСО (Међународна организација за стандардизацију) је глобални савез националних тела за стандардизацију (Тела чланица ИСО). Развој међународних стандарда се обично спроводи преко ИСО техничких комитета. Свака институција чланица заинтересована за предмет за који је основан технички комитет има право да буде заступљена у тој комисији. Међународне владине и невладине организације које су у вези са ИСО такође су укључене у овај посао. ИСО блиско сарађује са Међународном електротехничком комисијом (ИЕЦ) о свим питањима електротехничке стандардизације.

Процедуре које се користе за израду овог документа и оне које се користе за даље одржавање описане су у Делу 1 ИСО/ИЕЦ директиве. Нарочито, обратите пажњу на различите стандарде одобрења који су потребни за различите типове ИСО докумената. Овај документ је израђен у складу са правилима уређивања у Дел 2 ИСО/ИЕЦ директиве (види исо.орг/дирецтивес).

Please note that certain contents of this document may be subject to patent rights. ИСО није одговоран за идентификацију било ког или свих таквих патената. Details of any patent rights identified during the preparation of the document will be in the introduction and/or list of patent claims received by ISO (see iso.org/patents).

Any trade names used in this document are information provided for the convenience of the user and do not constitute an endorsement.

Voluntary, related standards and conformity assessment related ISO specific and express the meaning of terminology as well as in relevant ISO technical barriers to trade (ТБТ) adhere to the principle of the world trade organization (WTO) information, please refer to the following URL:iso.org/iso/foreword.html.

This document has been prepared by the Technical Committee of the European Committee for Standardisation (CEN), CEN/TC 172 (Pulp, папир и картон), in cooperation with the Technical Committee ISO/TC 6 (папир, board and pulp) and Subcommittee SC 2 (Test methods and quality specifications for paper and board). Comply with ISO and CEN technical cooperation agreement (Vienna Agreement).

The third edition cancelled and replaced the technically revised second edition (ИСО 12625-1:201). Главне промене у односу на претходно издање су следеће:

– Change the number of terms to those directly related to the organization;

— The alphabetical index was reorganized by merging and adding “term groups”;

– Edit updates.

A list of all the parts in the ISO 12625 series can be found on the ISO website.

Any feedback or questions about this document should be directed to the user’s national standards body. A complete list of these institutions can be found at iso.org/members.html.

увести
This document defines defining terms for the physical properties of tissue paper manufactured using wrinkling or non-wrinkling techniques and includes products made using a combination of these tissue paper manufacturing processes.

Paper towel products are an important and growing market for single-use disposable sanitary and industrial products. The current range of familiar products includes toilet paper, facial tissues, kitchen/household towels, hand towels, napkins, MATS, industrial wipes, other absorbent tissues and lotion treatments.

Tissue paper manufacturing techniques have evolved and deviated from “normal” paper techniques, so there is a need for a new vocabulary.

The purpose of this document is to get household paper manufacturers, tissue processors and tissue customers to agree on various tissue manufacturing terms and to facilitate the harmonization of testing methods. Each of the terms listed is briefly defined and illustrated if found useful. In writing this document, English was chosen as the original language. Then it was said that some expressions cannot be translated into another language. For these cases, English expressions are used.

1 домет
This document establishes general principles for the use of terminology in the entire field of work for tissue and household paper products.

It allows the use of generic terms in industry and business.

It is specified that ISO 15755 is suitable for the detection of impurities and dents in tissue paper and tissue products.

ИСО 287 applies to the determination of moisture content in tissue and household paper products.

2 Normative references
There is no normative reference in this document.

3 Terms and Definitions
For the purposes of this document, the following terms and definitions apply.

3.1 Water Absorption

The ability of tissue paper (3.58) and/or tissue products (3.59) to absorb liquids

3.2 Absorption

3.2.1 Absorption capacity

The amount of liquid absorbed per unit mass of the sample under test

Белешка 1: Water absorption capacity is defined in ISO 12625-8.

3.2.2 Absorption rate

The mass of the liquid absorbed by the sample per unit time is determined by dividing the total mass of the liquid absorbed during a given period of time by the duration of the period

3.2.3 Absorption Time

The time required for complete wetting of the sample

[Извор: ИСО 12625-8:201, 3.1]

3.3 Accelerated Aging

A procedure that quickly predicts changes in the characteristics of tissue paper (3.58) or tissue products (3.59) that occur over a longer period of time under normal conditions

Белешка 1 This is particularly the case for wet strength tissue paper or tissue products whose wet resistance increases over time. An accelerated aging procedure for determining wet strength is specified in ISO 12625-5.

ИСО 12625-1-2019 Tissue paper and tissue products – Парт 1 Vocabulary

3.4 Apparent packing density

The mass of tissue paper (3.58) or tissue products (3.59) per unit volume is calculated from its gram weight (3.28) and expanded thickness (3.10)

Белешка 1: It is determined by dividing the gram weight of tissue paper or tissue product by the thickness determined on the tissue.

[Извор: ИСО 12625-3:214, 3.4]

3.5 Paper Towel products for outdoor use

AFH Tissue products

Paper towel products for institutional and industrial markets (3.59)

Example: Tissue products used in hospitals, restaurants, hotels, offices.

3.6 Base Paper

A single sheet of tissue paper produced as a semi-finished product and intended to be converted into a finished product

3.7 Substrate forming

Wet-formed coils between one or two consecutive wires or between one wire and felt produce endless sheets of paper with a gram weight (3.28), usually between 10 g/m2 and 50 g/m2

3.8 Brightness

3.8.1D65 brightness

The intrinsic radiance (reflectance) factor measured using a reflectoscope with the properties described in ISO 2469, equipped with a filter or corresponding function with an effective wavelength of 457nm and a half-peak bandwidth of 44nm, and adjusted so that the UV content of the radiation incident on the sample under test corresponds to the UV content of the CIE standard light source D65

[Извор: ИСО 2470-2:2008, 3.4, Modified — the entry symbols R457, D65 and note 1 were deleted.

3.8.2C brightness

ISO brightness

The inherent diffuse radiation (reflectance) factor measured using a reflectoscope with the properties described in ISO 2469, equipped with a filter or corresponding function with an effective wavelength of 457nm and a half-bandwidth of 44nm, and adjusted so that the UV content of the irradiation incident on the sample under test corresponds to the UV content of the CIE source C

[Извор: ИСО 2470-1:2016, 3.4, Modified – Added the preferred term “C brightness” and deleted the entry symbol R457 and note 1.

3.9 Bulk

Reciprocal of apparent packing density (3.4)

3.10 Expansion thickness

The thickness of a single sheet of tissue paper (3.58) or of a tissue product (3.59), calculated from the thickness of several sheets of superimposed paper, measured at the static load applied

[Извор: ИСО 12625-3:2014, 3.3]

3.11 Calender

Mechanical treatment of a substrate passing through the clamp between two smooth cylinders with the aim of improving the smoothness or surface softness of tissue paper (3.58) or household paper (3.59)

Белешка 1: This operation is performed by calender. Додатно, the process allows some control over the thickness of tissue paper or tissue paper products.

3.12 Cellulose filler

A corrugated mesh or sheet of open structure, made of cellulose fibers (mainly chemical pulp) and consisting of one or more layers of lightweight paper

Белешка 1: Open formation is obtained when paper is produced at low base weight and high tensile (usually over 35%).

Белешка 2: Very low gram weight soft crepe paper, usually used in bundles or MATS containing several sheets of paper.

[Извор: ИСО 4046-4:2016, 4.37, Modified — (mainly chemical pulp) added, entry Notes 1 and entry Notes 2]

3.13 Cloth-like touch

Properties of tissue paper (3.58) or tissue products (3.59) that give it a similar feel to woven cloth materials

3.14 Color

3.14.1 International laboratory color space

Three-dimensional approximate uniform color space, by drawing rectangular coordinates L*, a*, b to produce *

Белешка 1: The quantity L* is a measure of the brightness of the test piece, where L* = 0 corresponds to black and L* = 100 is defined by a perfect reflection diffuser. Visually, the quantities a* and b* represent the red and green axes and yellow and blue axes in the color space, редом, making

— +a* is a measure of the redness of the test piece,

– −a* is a measure of the greenness of the test item.

— +b* is a measure of the degree of yellowing of the test item, и

– −b* is a measure of the blueness of the test component.

If both a* and b* are zero, the specimen is gray.

[Извор: ИСО 5631-3:2015, 3.6, modified — Белешка о уносу 1 added]

3.14.2CIELAB Color (D65/10°)

The L*, a* and b* values of the sample were evaluated according to the CIELAB 1976 system, according to the CIE 1964 (10°) standard colorimetric observer and the CIE standard light source D65

Белешка 1: See ISO 12625-7 for more information.

[Извор: ISO/TR 10688:2015, 2.5.2, Modified — Delete preferred term “(L*, a*, b*)”, preferred term CIELAB color (D65/10°), and add entry Note 1]

3.14.3CIELAB Color (C/2°)

The L*, a*, and b* values of the sample were evaluated according to the CIELAB 1976 system, according to the CIE 1931 (2°) standard colorimetric observer and CIE light Source C

Белешка 1: See ISO 12625-15 for more information.

[Извор: ISO/TR 10688:2015, 2.5.1, Modified — Delete preferred terms “(L*, a*, b*)”, preferred terms CIELAB Color (C/2°) and Note 1]

Јаван је само одељак са стандардним информацијама. Да бисте видели цео садржај, морате купити стандард преко званичних канала.