Опис

БГД 502 Single Blade Cross Hatch Adhesion Cutter

Опис

This instrument is widely used to evaluate the adhesion of various coatings. A high precise machined wheel presenting 6 или 11 cutting blades with various spacing is mounted in a handle. The test is carried out by performing 2 series of crossed cuts at right angle. The obtained lattices is either brushed or cleared with adhesion tape. According to the coatings thickness and the related spacing, the results can be classified with reference to a standard scale. It has long life tool with 8 cutting edges and comfortable wood handle.

When applied to multi-coat system, assessment of the resistance to separation of individual layers of the coating from each other may be made.

у наставку, all Biuged cross hatch testers are designed with turnable cutter holder, which is very convenient to cut coatings on curve or uneven surface and ensure to apply a uniform power to cut through the substrage.

The Cross Hatch Cutters conform with the requirements of：

БС 3900 E6；BS/EN ISO 2409；АСТМ Д 3359 Д 3302；

БГД 502 Single Blade Cross Hatch Adhesion Cutter

■ Eight working side blades：When the blade edge is not sharp enough, users can loosen the boat type nut and top thrust screw to rotate it to achieve a new blade.
■ Multi-cutting blades spacing：1mm/2mm/3mm

■ The number of square：25squares/100squares

■ Normal Packing List

① Carrying case

② Cross Hatch Cutter & Handle

③ 1 roll of 3M Scotch Transparent Tape

④ Brush

⑤ Magnifier

⑥ Calibration Certificate

БГД 502 Single Blade Cross Hatch Adhesion Cutter

3M Scotch Transparent Tape

Used to test the adhesion of film after the film was cut ，Its adhesion power is 10±1N/25mm

■ Информације за наручивање:

BGD 1011—600P Type：Length/32.9m；Width/19 mm

BGD 1012—600 Тип： Length/66.0m；Width/19 mm

BGD 1013—600 Тип： Length/66.0m；Width/25.4 mm

BGD 1020—610 Тип： Length/66.0m；Width/19mm

BGD 1021—610 Тип： Length/66.0m；Width/25.4 mm

BGD 1030—810 Тип： Length/32.9m；Width/19 mm

BGD 1040—898 Тип： Length/50.0m；Width/25 mm