DV1T / DV2T Series Touch Screen Viscometer
- Опис
- Упит
Опис
DV1T / DV2T Series Touch Screen Viscometer
Widely used in paint, боје, козметика, мастило, pulp, храна, oil, starch, solvent adhesive, latex, biochemical products and other high viscosity industries.
Главне карактеристике:
1 adopt ARM technology, built-in Linux system. The operation interface is simple and clear, through the creation of test program and data analysis, the viscosity test is carried out quickly and conveniently.
2.the viscosity test value is accurate : each measuring range is automatically calibrated by a computer , the precision is high , and the error is small ;
3.display is rich: in addition to viscosity (dynamic viscosity and kinematic viscosity), there are also temperature, брзина смицања, shear stress, measurement value as a percentage of the full range value (graphic display, range overflow alarm, automatic scanning, Maximum measurement range, date, time and so on under current rotor speed combination. Show kinematic viscosity when density is known.
4.комплетне функције: timing measurement, self-built 30 groups of test programs, access to 30 groups of measurement data, real-time display of viscosity curves, printing data and curves;
5.front level: level adjustment is intuitionistic and convenient;
stepless speed regulation:
6.RV1T series: 0.3-100 рпм, a total of 998 rotational speeds
RV2T series: 0.1-200рпм, 2000 revolutions
7.showing the curve of shear rate versus viscosity : the range of shear rate can be set , and displayed on the computer in real time ;Curve of time – до – viscosity can also be displayed
8.optional Pt100 temperature probe: wide temperature range, ranging from -20 ℃ to 300 ℃, and measuring precision 0.1 ℃;
9.Optional accessories rich: R1 rotor, temperature sensor, viscometer special thermostat bath, thermostat cup, штампач, standard viscosity sample (standard silicone oil), итд.；
The measurable range is very large, ranging from 100 до 320 million MPA.
DV1T / DV2T Series Touch Screen Viscometer
Detailed technical parameters:
| model | RVDV-1T | HADV-1T | HBDV-1T |
| Control / display mode | 5-инчни екран у боји осетљив на додир | ||
| брзина（r/min） | 0.3–100 infinitely variable speed , a total of 998 speed options | ||
| measuring range mPa.s | 100-13 million | 200-26 million | 800-104 million |
| （Measure viscosity below the lower limit, need to choose R1 rotor） | |||
| rotor | R2 – R7（6, marking） R1（Optional） | ||
| Sample dosage | 500ml | ||
| measurement error（Newtonian liquid） | ±1% | ||
| Repetition error (Newtonian liquid) | ±0,5% | ||
| Display shear response / брзина смицања | standard configuration | ||
| Timing function | standard configuration | ||
| Display viscosity curve | брзина смицања – вискозитет Temperature-viscosity Time-viscosity | ||
| kinematic viscosity | Density of sample to be input | ||
| температура measurement | Standard temperature probe interface (need to select temperature probe) | ||
| autoscan | Automatically scan and recommend the best combination of rotor and speed | ||
| Maximum measurement range | Automatic display of the selected combination of rotors and rotational speeds in a measurable range of viscosity | ||
| Self-built measurement program | Save up to 30 групе (including rotor, брзина, температура, време, итд.) | ||
| Preservation of measurement results | До 30 sets of data can be stored (including viscosity, температура, rotor speed, брзина смицања, shear stress, време, density, kinematic viscosity, итд.) | ||
| Data, curves (marked with print interface, printer to be purchased) | |||
| data output interface | RS232 | ||
| Constant temperature component | Selection (all kinds of viscometer special constant temperature slot, constant temperature cup) | ||
| source | Wide voltage work (110В / 60Hz or 220V / 50Хз) | ||
| outline dimension | 300 × 300 × 450 мм) | ||
| model | RVDV-2T | HADV-2T | HBDV-2T | |
| Control / display mode | 5-инчни екран у боји осетљив на додир | |||
| брзина（r/min） | 0.1–200 infinitely variable speed , a total of 2000 speed options | |||
| measuring range mPa.s | 100-40 million | 200-80 million | 800-320 million | |
| （Measure viscosity below the lower limit, need to choose R1 rotor） | ||||
| rotor | R2 – R7（6, marking） R1（Optional） | |||
| Sample dosage | 500ml | |||
| measurement error（Newtonian liquid） | ±1% | |||
| Repetition error (Newtonian liquid) | ±0,5% | |||
| Display shear response / брзина смицања | standard configuration | |||
| Timing function | standard configuration | |||
| Display viscosity curve | брзина смицања – вискозитет Temperature-viscosity Time-viscosity | |||
| kinematic viscosity | Density of sample to be input | |||
| температура measurement | Standard temperature probe interface (need to select temperature probe) | |||
| autoscan | Automatically scan and recommend the best combination of rotor and speed | |||
| Maximum measurement range | Automatic display of the selected combination of rotors and rotational speeds in a measurable range of viscosity | |||
| Self-built measurement program | Save up to 30 групе (including rotor, брзина, температура, време, итд.) | |||
| Preservation of measurement results | До 30 sets of data can be stored (including viscosity, температура, rotor speed, брзина смицања, shear stress, време, density, kinematic viscosity, итд.) | |||
| Data, curves (marked with print interface, printer to be purchased) | ||||
| data output interface | RS232 | |||
| Constant temperature component | Selection (all kinds of viscometer special constant temperature slot, constant temperature cup) | |||
| source | Wide voltage work (110В / 60Hz or 220V / 50Хз) | |||
| outline dimension | 300 × 300 × 450 мм) | |||
