ИСО1133, АСТМ Д1238 Инструмент за испитивање брзине протока талине
- Опис
- Упит
Опис
ИСО1133, ASTM D1238 Melt Flow Rate Test Instrument Test Standard:
GB/T3682-2000,ISO1133-97, АСТМ Д1238
Discription:
ИСО1133, АСТМ Д1238 Инструмент за испитивање брзине протока талине use for ABS, polystyrene, полиетилен, polypropylene, polyamide, fiber resin, acrylate, POM, флуорна пластика, polycarbonate and other plastic materials, the melt flow rate (МФР) or the melt volume flow rate (МВР) to be determined.
Product Character:
1.English LCD Touched Screen.
2.Hand automatic cutting material.
3.Double temperature control system, temperature control precision is more accurate, higher heating efficienc
4.Double imported sensors, more accurate temperature gradient from top to bottom, can be used independently, and improve the service life.
5.Cylinder for imports hartz alloying nitriding treatment, opening mould for carbon tungsten steel material, material reality.
6.Insulation barrels of sus304 stainless steel material for the whole, long-term high temperature does not rust.
7.Automatic calculation results, and print.
Test Methods:MFR Methods
Display Mode:English color touch screen display
Спецификација
Модел | LR-A001-A |
Barrel parameters | Inner hole 9.55±0.025mm |
Pistons parameters | Piston head: 9.475±0.015mm |
Outlet length | 8.000±0.025mm |
Paramters | Extrusion hole 1=2.095±0.005mm |
Temperature parameter | With intelligent temperature control instrument, with four pairs of significant temperature setting control, PID parameters can be automatically set, precision up to ± 0.1 degree centigrade |
Распон температуре | Room Temperature~450degree centigrade |
Temperature fluctuation | ±0.2 ℃ |
Temperature uniformity | ±1℃ |
Temperature display resolution | 0.1℃ |
Display resolution | 0.1℃ |
Maximum comsuption | < 600В |
Time display resolution | 0.1с |
Weight parameters are as follows: | |
Weight accuracy | ±0,5% |
Basic configuration
| A 0.325kg |
B 1.2kg | |
C 2.16kg | |
D 3.8kg | |
E 5kg | |
F 10kg | |
G 12.5kg | |
H 21.6kg | |
Position detection | |
Loop distance from up and down | 30мм |
Control precision | ± 0.1mm |
Test flow control | |
Times of cutting the material | 0~10 times |
Material cutting interval | 0~999s(set reference Table 2) |
Control flow reaches the set temperature without volatility | |
Barrel temperature time | 15 мин. |
Material be installed | 1 мин. |
Material sample temperature recovery time | 4 мин. |
When binder set | 1мин |
Output mode | Micro-automatic print output |
Cut material methods | The hand automatic cut into one body |
Test load | Eight sets of weights |
Снага | AC220V±10% 50/60HZ |
Accessories List
Не | Name | Qty | Remark |
1 | Тежина | 1 комплет | 0.325㎏、0.875㎏、1.835㎏、2.5㎏、2.915㎏、3.475㎏、4.615кг、5.0k g |
2 | Weight tray | 1ком | Within level 1 load |
3 | Charging hopper | 1ком | |
4 | Mouth mold cleaning rod | 1ком | |
5 | Charging bar | 1ком | |
6 | Cylinder cleaning rod | 1ком | |
7 | piston rod | 1ком | |
8 | mouth mold | 1ком | |
9 | gauze | 2roll | |
10 | Print paper | 2 roll |
Standard test force(8 level)
1 ниво:0.325 kg=(piston rod+weight tray+heat insulation cover+No 1 weight)
=3.187N
2 ниво:1.200 kg=(0.325+No2 0.875 тежина)=11.77 N
3 ниво:2.160 kg=(0.325+No3 1.835 Тежина)=21.18 N
4 Ниво:3.800 kg=(0.325+No4 3.475Weight)=37.26 N
5 Ниво:5.000 kg=(0.325+No.5 4.675Weight)=49.03 N
6 Ниво:10.000 kg=(0.325+No.5 4.675weight+No.6 5.000Weight)=98.07 N
7 Ниво:12.000 kg=(0.325+No.5 4.675weight+No.6 5.000+No.7 2.500weight)=122.58 N
8 ниво:21.600 kg=(0.325+No.2 0.875weight+No3. 1.835+No.4
3.475+No.5 4.675+No.6 5.000+No.7 2.500+No.8 2.915weight)=211.82 N