ЛР-Ц008 Тестер затезне чврстоће типа пода
- Опис
- Упит
Опис
ЛР-Ц008 Тестер затезне чврстоће типа пода
Користи:
Used for rubber, пластике, жица и кабл, текстилне, waterproof material, non-woven cloth and other non-metallic materials and metal wire, metal foil, metal sheet and metal bar mechanical properties test, with special fixture is also suitable for various finished products stretching, компресије, љуштење, СМИЦАЊЕ, tear test, to determine the quality of products.
It can store the results of 10 test reference points, automatically calculate the average value, automatically grab the maximum value, and the force value when breaking.Force value by the sensor output, feedback display, test displacement real-time display.Can realize fixed force value, positioning and other tests.
The machine contains a thermal printer, which can output the test results automatically.
The machine is simple in structure and easy to operate. It can be directly placed on the ground of the studio for testing.Especially suitable for use in the production line to control the quality of testing instruments.This series of models is mainly suitable for test load less than 5000N of non-metal and metal material test.
ЛР-Ц008 Тестер затезне чврстоће типа пода
Technical participation:
| Capacity choose | 5,10,20,50,100,200,500kg optional |
| Тест тачност | Show value±1％ |
| Режим приказа | Touched screen control |
| Unit switch | Кг、фунта、Н |
| Data sampling frequency | 200times/sec |
| Testing machine resolution | The maximum load is 1/±25000 yards, inside and outside are not classified, and the whole resolution is unchanged |
| Load sensor | Basic configuration: pull and pressure sensors (maximum load) |
| Effective test width | 150мм |
| Effective tensile space | 800мм |
| Total stroke | 1100мм |
| Тестни опсег брзине | 50-300mm/min Stepless speed regulation and 5-speed fixed speed (special test speed can be customized according to customer requirements) |
| Accuracy of displacement measurement | Within ± 1% of the value shown |
| Breakpoint ratio setting | 0～99％，The user can set the proper break downtime according to different materials |
| Test bench safety device | Up and down stroke limiting device |
| Overload protection | Over 10% of the maximum load, the machine is automatically protected |
| Fixture configuration | A set of stretching fixtures |
| Величина машине | 550×400×1820mm |
| Тежина машине | About 100 Кг |
