คำอธิบาย
36L Benchtop Programmable Environmental Temperature and Humidity Test Chamber
มาตรฐานการออกแบบ:
GB11158 | เงื่อนไขทางเทคนิคของห้องทดสอบอุณหภูมิสูง |
GB10589-89 | เงื่อนไขทางเทคนิคของห้องทดสอบอุณหภูมิต่ำ |
GB10592-89 | เงื่อนไขทางเทคนิคของห้องทดสอบอุณหภูมิสูง-ต่ำ |
กิกะไบต์/T10586-89 | เงื่อนไขทางเทคนิคของห้องทดสอบความร้อนชื้น |
กิกะไบต์/T2423.1-2001 | วิธีทดสอบห้องทดสอบอุณหภูมิต่ำ |
กิกะไบต์/T2423.2-2001 | วิธีทดสอบห้องทดสอบอุณหภูมิสูง |
กิกะไบต์/T2423.3-93 | วิธีทดสอบห้องทดสอบความร้อนชื้น |
กิกะไบต์/T2423.4-93 | วิธีทดสอบแบบชื้น-ความร้อนแบบสลับกัน |
กิกะไบต์/T2423.22-2001 | วิธีทดสอบการเปลี่ยนอุณหภูมิ |
IEC60068-2-1.1990 | วิธีทดสอบห้องทดสอบอุณหภูมิต่ำ |
IEC60068-2-2.1974 | วิธีทดสอบห้องทดสอบอุณหภูมิสูง |
GJB150.3 | วิธีทดสอบที่อุณหภูมิสูง |
GJB150.4 | วิธีทดสอบอุณหภูมิต่ำ |
GJB150.9 | วิธีทดสอบความร้อนชื้น |
60068-2-1
36L Benchtop Programmable Environmental Temperature and Humidity Test Chamber
การใช้งาน:
อุปกรณ์นี้สามารถจำลองสภาพแวดล้อมที่แตกต่างกันได้. เหมาะสำหรับการทดสอบประสิทธิภาพของวัสดุ, เช่นกันความร้อน, ต้านทานความแห้ง,ต้านทานความชื้นและต้านทานความหนาวเย็น. ที่สามารถกำหนดประสิทธิภาพของวัสดุได้.
36L Benchtop Programmable Environmental Temperature and Humidity Test Chamber
ข้อมูลจำเพาะ
1. รายการ 2. แบบอย่าง | Constant Temperature and humidity test chamber 36ล |
3. การทำงาน | It simulates the products in the chamber where the climate condition of different temperature and humidity, such as high-low operation and storage, temperature cycling, high-low temperature and high-low humidity, moisture condensation etc. to check its adaptability and changing performance. It’s required to conform to international regulation (ไออีซี, เขา, กิกะไบต์, MIL…) to reach the consistency (including test schedule, condition, วิธี) under the international standard. |
4. ตัวอย่าง application | The chamber applies to: compatibility test for store, transportation and application of electric, ผลิตภัณฑ์อิเล็กทรอนิกส์, unit components, parts and other materials under high or low temperature. The following samples are prohibited to be tested and stored: – Inflammable , explosive and other volatile substances; – Corrosive substance; – Biont; – Strong electromagnetic emission source. |
5. ปริมาณ, ขนาด & น้ำหนัก |
5.1. ปริมาณ 5.2. Internal size 5.3. Exterior size 5.4. น้ำหนัก | 36ล ว 350 x H300 x D350mm W900 x H760 x D920mm 170กิโลกรัม |
6. ผลงาน |
6.1. สภาพการทดสอบ | อุณหภูมิ:+25℃, ความชื้น: ≤85%, no samples in the chamber |
6.2. วิธีการทดสอบ | กิกะไบต์/ที 5170.2-1996 Temperature test chamber GB/T5170.5-1996 Temperature and humidity test chamber (only temperature and humidity) |
6.3. ช่วงอุณหภูมิ | -20℃→+150℃ (ปรับได้) |
6.4. ความผันผวนของอุณหภูมิ | ±0.5℃ |
6.5. Temperature accuracy distribution | ±2.0℃ |
6.6. ช่วงความชื้น | 30%~98%R.H (temperature at 20℃-85℃) |
6.7. ชื้น. fluctuation | ±2.5%RH. |
6.8. Humidity accuracy distribution | ±3.0%. |
6.9. Heat-up time | -20℃ → +150℃ Heat up for 2-4.0℃/min |
6.10. เวลาทำความเย็น | +150℃→ -20℃ Cooling for 0.7-1.0℃/min |
6.11. Load condition | Testing space is not more than 3/4 of the total space, no heating |
6.12. ผู้ถือตัวอย่าง | Stainless steel punching stencil |
6.13. Relative humidity and temperature control range (refer to fig.) | |
6.14. Meet the technical standards | กิกะไบต์/ที 2423.1-2001 Test A: Low temperature test method กิกะไบต์/ที 2423.2-2001 Test B: High temperature test method GJB 150.3-1986 High temperature test GJB 150.4-1986 Low temperature test IEC68-2-1 Test A: เย็น IEC68-2-2 Test B: Dry heat GB11158 “Technical Conditions for High Temperature Test Chamber ” GB10586-1 “Technical conditions for Damp heat test chamber ” กิกะไบต์/ที 2423.2 “Basic environmental testing procedures for electric and electronic products B: High temperature test method”. กิกะไบต์/ที 2423.3 “Basic environmental testing procedures for electric and electronic products Ca: Constant damp heat testing method” etc. |