LR-A018 เครื่องหลอมโลหะแผ่นเล็กสองชั้น (เครื่องทำความร้อนไฟฟ้าและน้ำเย็น)
- คำอธิบาย
- สอบถามรายละเอียดเพิ่มเติม
คำอธิบาย
LR-A018 เครื่องหลอมโลหะแผ่นเล็กสองชั้น (เครื่องทำความร้อนไฟฟ้าและน้ำเย็น)
- ภาพรวม:
This series of vulcanizing machine is used to press and form all kinds of rubber model products and non-model products of the main equipment, can also be used to press all kinds of thermosetting plastics and foaming rubber and plastic products. With independent power mechanism and electrical system, the use of button centralized control. The working pressure and heating temperature can be adjusted within a certain range. This model has two kinds of split and semi-automatic.
- Equipment parameter
แบบอย่าง | CREE-6014C-10 | CREE-6014C-30 | CREE-6014C-50 |
Pressure capacity | 10ต | 30ต | 50ต |
Pressure gauge | The two-node pressure is adjustable, and the precision of pressure adjustment is 10% | ||
Plate size (mm metric) | Plate size (mm metric) 250*250/300*300/350*350/400*400/450*450/500*500/600*600 [มม] Plate Size (mm metric) 250*250/300*300/350*350/400*400/450*450/500*500/600*600 [มม] | ||
Hot press plate material | High temperature resistant imported steel plate, surface carbonization quenching, special treatment of fast heat conduction, parallel pressure does not change, wear-resistant. | ||
Platen hardness | 50〜60HRC | ||
Flatness of the platen | <0. 03มม | ||
Flatness of platen | <0.16มม | ||
ช่วงอุณหภูมิ | from normal temperature to 250°C [Maximum temperature can be customized 500 องศา] [Select one of the price lists shall prevail] | ||
ความสม่ำเสมอของอุณหภูมิ | The larger the platen, the higher the Temperature uniformity, the worse the temperature uniformity. | ||
Temperature control unit | Precision module, with PLC touch screen control, touch screen internal display, การแสดงตัวเลข. | ||
โหมดควบคุมอุณหภูมิ | self-setting with high precision sensor, ความแม่นยำในการควบคุมอุณหภูมิ: ±1.0°C. | ||
จับเวลา | Displays the Settings on the touch screen. The time range is 0.1S ~ 99min ~ 9.9hr | ||
heater | [According to the pressure plate area configuration of different power packing pressure plate temperature uniformity, not the same power] | ||
Warming time | The takes about 15 minutes from the normal temperature to 160 องศาเซลเซียส | ||
Two hot plates | can be set to control the temperature | ||
Method of heating | เครื่องทำความร้อนไฟฟ้า. Method of heating | ||
Two pieces of cold plate | Water cooling laminates are controlled by water temperature | ||
Mode of cooling | Tap water cooling/chiller cooling [Optional price list shall prevail] | ||
Oil pressure system | The Oil pressure system adopts CREE.6 hydraulic flow closed loop control system. The oil pump drives high-performance electro-hydraulic with the piston of the high precision non-resistance cylinder to implement the constant rate control mode, with the automatic pressure compensation function. A pressure automatic pressure, strong load force, stable lifting; Automatic pressure, pressure retention, pressure relief. | ||
Cylinder stroke | Cylinder stroke Max 150mm [ปรับแต่งได้] [Select one subject to the quotation] |
Cylinder speed | 11มิลลิเมตร/วินาที | ||
Pressure gauge | 0 〜200kg/sq.cm | ||
Die opening mode | Automatic ascent and descent (with manual and automatic dual functions) | ||
อุปกรณ์ความปลอดภัย | Safety shield, safety door. | ||
Number of safety devices | สี่ | ||
Supporting mold frame [ไม่จำเป็น] | custom | ||
Main engine volume | (WXDXH)1100เอ็กซ์ 550เอ็กซ์ 1500 มม | (WXDXH)1100X650 เอ็กซ์ 1500 มม | (WXDXH)1200X750 เอ็กซ์ 1650 มม |
Supply voltage | 3-phase electricity, ไฟ AC220V | 3-phase electricity , AC380V | 3-phase electricity , AC380V |
น้ำหนักเครื่อง | 550กิโลกรัม | 700กิโลกรัม | 780กิโลกรัม |
Operating method of testing machine
1, ก่อนอื่นเลย, the testing machine for the level adjustment, is the use of level placed on the machine base, and according to the level indicator to adjust the foundation screw is horizontal (installation of the machine or mobile machine adjustment).
- Start the main power switch to make the power supply pass through each control panel of the machine.
- Set the test temperature.
4, according to the pattern requirements respectively set the upper, upper, lower and lower die temperature, when the temperature reaches the set temperature, open the cylinder door, put isolation stainless steel plate and pattern
- Start the test button to make the hydraulic cylinder press up to start the test (please do not adjust the pressure and speed of the hydraulic system).
- After reaching the set time, the system will reset automatically.
7, observe the pattern situation, the test is over.