- คำอธิบาย
- สอบถามรายละเอียดเพิ่มเติม
คำอธิบาย
IEC60529 Immersion Tank is for the waterproof detection of IPX water test. The JL-X includes the following test grades: IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX7 and IPX8 (Refer to page 51 of IEC60529). It is widely used in the authentication test organization for the products such as electrical & electronic products such as LED luminaires as well as in the relevant quality control department for the waterproof detection of the enclosures protection grades.
2.การใช้งาน:
The whole waterproof test system includes:
• Drip Box : The drip box is for IPX1 and IPX2 drip test. The drip box size is 800x800x75mm (กxยxส)
• Swing Pipe Water Spray Test Equipment : It is for IPX3 and IPX4 test, the semi-diameter of swing pipe is 1meter
• Waterproof Jet Test Device ) With water supply device size is 1000x1000x1000mm, the bore diameter is 6.3mm (IPX5) and 12.5mm (IPX6)
• Immersion tank Waterproof test Device : It is for IPX7 and IPX8 test.
Swing tube rain test chamber
การแนะนำ&แอปพลิเคชัน:
IPX8 50meter depth water pressure immersion test device simulates the water immersion environment to test the water resistance and sealing of the samples during storage, transportation and usage. It is widely applied to electrical and electronic products, โคมไฟและโคมไฟ, electrical cabinet, ส่วนประกอบไฟฟ้า, รถยนต์, motorcycle and its spare parts and other products. It provides the basis to improve the performance of the products.
Definition of IPX8: See the IP grade sheet.
คุณสมบัติ:
1. Meet the requirement of IEC60529 standard IPX7 water pouring test and IPX8 water splash test.
2. Easy operation, special design.
3 Best after sales service: One year free parts maintenance.
4 Customization is available & welcomed.
พารามิเตอร์ทางเทคนิค: See the label.
Except IPX8 50meter depth water pressure immersion test device, Dongguan Yuan Yao Electronics Technology Co., Ltd also can supply:
Precision Oven Tester, Triple Type Temp. & Humi. ห้อง, อุณหภูมิ. &Humi. Control Host, Air Thermal Shock Tester, Liquid Thermal Shock Tester, Salt Spray Tester, Walk-in environmental Test Room, อุณหภูมิ. Humi. &Vibration Conbined Test Chamber, Aging Oven Tester, Rain/Spray Test Chamber, Burn-in test equipment, Dust Tester, Steam Aging Tester, เครื่องทดสอบการสั่นสะเทือน, เครื่องทดสอบแรงดึง, Drop Tester and so on.
Welcome to enquire and purchase!
Swing tube rain test chamber
ข้อมูลจำเพาะ | |||||
แบบอย่าง | YSRT-1728-A | YSRT-1728-E(IEC-529)(CNS14165) | |||
Internal Dim. WHD(มม) | 1200× 1200× 1200 | 1200× 1200× 1200 | |||
External Dim. WHD(มม) | 1750× 1850× 1300 | 1750× 1850× 1300 | |||
Water Temp. | ปกติ | ปกติ | |||
Spray Type | Total water ไหล(ลิตร/นาที) | R1 | 1.8 | IP× 1 | With in 1–1.5มม./นาที(In drip box) |
R2 | 3.2 | IP× 2 | With in 3–3.5มม./นาที(In drip box) | ||
S1 | 24.5 | IP× 3 | angle± 600, ร: 400มม, 1.1ลิตร/นาที | ||
S2 | 39.2 | IP× 4 | angle± 1800, ร: 400มม, 1.8ลิตร/นาที | ||
Preesure of spray nozzle (kgf/cm 2 ) | R1 | 0.1 | 1. Flow rate of the water=0.07L/min 2. IP× 3, รัศมี: 400มม, Number or open holes=16, total water flow: 1: 1ลิตร/นาที. 3. IP× 4, รัศมี: 400มม, Number or open holes=25, total water flow: 1: 8ลิตร/นาที. *รัศมี: 200มม, R400mm. (For IP× 3, IPx4) | ||
R2 | 0.3 | ||||
S1 | 1 | ||||
S2 | 3 | ||||
(รอบต่อนาที)Test Specimen Frame | 17รอบต่อนาที | 1รอบต่อนาที | |||
Spray Nozzle Rotation Speed | 23รอบต่อนาที | Swing 60° from vertical for 4 seconds at one time Swing 180° from vertical for 12 seconds at one time | |||
วัสดุ | Interior | SUS#304 | |||
Exterior | |||||
Other Components | Chamber lamp. Wiper casters with Adjusters | Chamber lamp. Wiper, casters with Adjusters | |||
Power Source[เค. ว] | AC 1Ψ 220V 60/50Hz 4KW |
IP grade sheet
LevelProtected againstTesting forDetails012345678
Not protected | _ | _ |
Dripping water | Dripping water (vertically falling drops) shall have no harmful effect. | Test duration: 10 นาที Water equivalent to 1 mm rainfall per minute |
Dripping water when tilted up to 15° | Vertically dripping water shall have no harmful effect when the enclosure is tilted at an angle up to 15° from its normal position. | Test duration: 10 นาที Water equivalent to 3 mm rainfall per minute |
Spraying water | Water falling as a spray at any angle up to 60° from the vertical shall have no harmful effect. | Test duration: 5 นาที Water volume: 0.7 litres per minute |
Splashing water | Water splashing against the enclosure from any direction shall have no harmful effect. | Test duration: 5 นาที Water volume: 10 litres per minute |
Water jets | Water projected by a nozzle (6.3 มม) against enclosure from any direction shall have no harmful effects. | Test duration: อย่างน้อย 3 นาที Water volume: 12.5 litres per minute |
Powerful water jets | Water projected in powerful jets (12.5 mm nozzle) against the enclosure from any direction shall have no harmful effects. | Test duration: อย่างน้อย 3 นาที Water volume: 100 litres per minute |
Immersion up to 1 ม | Ingress of water in harmful quantity shall not be possible when the enclosure is immersed in water under defined conditions of pressure and time (จนถึง 1 m of submersion). | Test duration: 30 นาที Immersion at depth of at least 1 m measured at bottom of device, and at least 15 cm measured at top of device |
Immersion beyond 1 ม | The equipment is suitable for continuous immersion in water under conditions which shall be specified by the manufacturer. Normally, this will mean that the equipment is hermetically sealed. อย่างไรก็ตาม, with certain types of equipment, it can mean that water can enter but only in such a manner that it produces no harmful effects. | Test duration: continuous immersion in water Depth specified by manufac |