Sponge compression fatigue testing machine
- คำอธิบาย
- สอบถามรายละเอียดเพิ่มเติม
คำอธิบาย
Sponge compression fatigue testing machine
มาตรฐาน:
GB/T10807-89;ไอเอสโอ 2439-1980;JISK6401;ASTM D3574;เช่น 2282.8 Method A-IFD Test.
Sponge compression fatigue testing machine
การประยุกต์ใช้ผลิตภัณฑ์:
Sponge /foam indentation hardness testing machine is also known as sponge, foam indentation hardness testing machine, tensile metallic and non-metallic, วัสดุโพลีเมอร์, การบีบอัด, ดัด, detection of low cycle fatigue and other projects can be according to customer product requirements according to GB, ไอเอสโอ, มาตรฐาน ASTM, เขา, EN and other standards for the preparation, to automatically strike the biggest test, ความแข็งแรงแตกหัก, ความแข็งแรงของผลผลิต, แรงดึง, compressive strength, ความแข็งแรงดัด, โมดูลัสยืดหยุ่น, การยืดตัว , ความเครียดการยืดตัวอย่างต่อเนื่อง, elongation and other parameters given stress.
คุณสมบัติหลัก:
1.Automatic counting, automatic indentation of 80,000 times to stop there Pause
2. High precision pressure sensors and large-scale integrated circuits, accurate determination.
3. Can always manually adjust indentation load, to keep it at 750 Newton
Sponge compression fatigue testing machine
ข้อมูลจำเพาะ:
Sensing method | Force sensor automatic dispaly |
Load Cell Capacity | 300กิโลกรัม |
เครื่องยนต์ | Servo motor control system |
Unit switch | กิโลกรัม,เอ็น,Lb |
ความแม่นยำ | 0.5 ระดับ(±0.5%) |
Testing stroke | 200มม |
ทดสอบความเร็ว | 100±20mm/min |
Size of upper compressing plate | Diameter 200mm |
Bottom Border-radius | R1mm |
Lower platform | 420mmx420mm |
Air hole diameter | 6.0มม |
Hole center gap | 20มม |
ขนาดชิ้นงาน | (380+10)mmx(380+10)mmx(50±3)มม |
พลัง | ไฟ AC220V |