เครื่องทดสอบความต้านทานการงอฝ่าเท้าทั้งรองเท้า
- คำอธิบาย
- สอบถามรายละเอียดเพิ่มเติม
คำอธิบาย
Whole Shoes Sole Flexing Resistance Tester is mainly used to determine the resistance of the material after repeated twists and turns, especially suitable for the sole including the structure of the sole. ในระหว่างการทดสอบ, the anti-slip pattern of the sole is combined with the maximum bending stress line, and the three small holes are penetrated with the incision knife. After a certain number of twists and turns at a specific speed of 90° bending Angle, use a magnifying glass to check the extension resistance of the sole.
The testing machine conforms to the standard requirements of EN-344.
EN-344 Whole Shoes Sole Flexing Resistance Test Machine,Footwear Sole Bending Tester
ครั้งที่สอง. ข้อมูลจำเพาะของผลิตภัณฑ์:
| มุมดัด | 90° | Diameter of circular shaft | φ30mm |
| Bending speed | 0~135 RPM | Width of fixture | 144มม |
| Also try | 3 พื้นรองเท้า | Count meter | นำ, 0~99999999 |
| หม่าลี่ | กระแสตรง, 375ว | ปริมาณ | 85×31×65cm |
| น้ำหนัก | 68กิโลกรัม | แหล่งพลังงาน | 1∮ AV220V, 3ก |
EN-344 Whole Shoes Sole Flexing Resistance Test Machine,Footwear Sole Bending Tester
ฉัน. ขอบเขตการใช้งาน:
The machine is mainly used to determine the resistance of the material after repeated twists and turns, especially suitable for the sole including the structure of the sole. ในระหว่างการทดสอบ, the anti-slip pattern of the sole is combined with the maximum bending stress line, and the three small holes are penetrated with the incision knife. After a certain number of twists and turns at a specific speed of 90° bending Angle, use a magnifying glass to check the extension resistance of the sole.
The testing machine conforms to the standard requirements of EN-344.
EN-344 Whole Shoes Sole Flexing Resistance Test Machine,Footwear Sole Bending Tester
ฉัน. ขอบเขตการใช้งาน:
The machine is mainly used to determine the resistance of the material after repeated twists and turns, especially suitable for the sole including the structure of the sole. ในระหว่างการทดสอบ, the anti-slip pattern of the sole is combined with the maximum bending stress line, and the three small holes are penetrated with the incision knife. After a certain number of twists and turns at a specific speed of 90° bending Angle, use a magnifying glass to check the extension resistance of the sole.
The testing machine conforms to the standard requirements of EN-344.
