ASTM D3450-15 İç Mimari Kaplamaların Yıkanabilirliğine İlişkin Standart Test Yöntemi
Anlamı ve kullanımı
5.1 İç mimari kaplamaların rengi genellikle toz ve diğer kirli maddelerden dolayı solur. The test method covers the relative ease and completeness of removing specific dirt from such surfaces by scrubbing. The greater the ease of removing dirt with minimal membrane erosion, the longer the expected service life.
5.2 The results obtained by this test method are not necessarily relevant to all types of stains.
5.3 Semi-finish paints usually only require the use of non-abrasive cleaners to remove dirt well, while flat paints may require abrasive types.
ASTM D3450-15 İç Mimari Kaplamaların Yıkanabilirliğine İlişkin Standart Test Yöntemi
Adım 1: Kapsam
1.1 The test method covers the determination of the relative ease with which dirt discoloration is removed from the inner coating dry film by washing with an abrasive or non-abrasive cleaner.
1.2 This test method is limited to coatings with a CIE-Y reflectance of 60% or higher measured according to test method E1347.
1.3 SI birimlerinde ifade edilen değerler standart kabul edilecektir.. Parantez içinde verilen değerler yalnızca referans amaçlıdır.
1.4 Bu standart, kullanımıyla ilgili tüm güvenlik konularını ele almayı amaçlamamaktadır.. Users of this standard are responsible for establishing appropriate safety and health measures prior to use and for determining the applicability of regulatory restrictions.
ASTM D3450-15 İç Mimari Kaplamaların Yıkanabilirliğine İlişkin Standart Test Yöntemi
2. Dosyaya bakın
ASTM standardı
D562 Test method for paint consistency using a Stormer viscometer to measure Krebs unit (KU) viskozite
D1193 reagent water specification
D1210 Method for fineness test of dispersity of pigment-vehicle system with Hegman gauge
E70 Method for measuring pH value of aqueous solution with glass electrode
E1347 Test method for the measurement of color and color difference by tristimulus colorimetry