soyutlama

This guide covers the selection and use of procedures for testing exterior wood stains. Buna su da dahildir – and solvent-based translucent and opaque stains. The different conditions affecting the coating are introduced in detail. A balance of performance needs to be considered when determining requirements and selecting tests. Different test methods for determining the properties of liquid coatings are listed and discussed. Different methods for determining coating application and film formation are proposed and discussed in detail. Different test methods for determining the appearance of dry film are given. Different test methods for determining dry coating properties are described in detail. Different test methods and practices for chemical analysis of external wood are described in detail. While many suggested test methods attempt to simulate the coating and the conditions under which the coating is used, it is not possible to accurately replicate all possible conditions. It is recommended to use the test material under field conditions, including appropriate controls, for final assessment of its suitability.

Bu özet referans standartlarına kısa bir genel bakıştır. Yalnızca referans amaçlıdır ve standardın resmi bir parçası değildir; Kullanımı ve uygulanması için standardın tam metnine referans verilmesi gerekmektedir.. ASTM hiçbir şekilde garanti vermez, açık veya zımni, ve bu özetin içeriğinin doğru olduğu anlamına gelmez, tamamlanmış veya yeni.

ASTM D6763-16 Standard Guide for Testing Exterior Wood Stains and Water Repellents

Adım 1: Kapsam

1.1 This guide covers the selection and use of procedures for testing exterior wood stains and water repellents. This includes water-based and solvent-based translucent and opaque stains and clear water repellents. The attributes that can be checked or, bazı durumlarda, the relevant test procedures are listed in 2.1 Ve 2.2.

Not 1: Dönem “opaque stain” is defined as a tinted composition applied to a wood surface to produce an even finish that obscures the grain and color of the wood rather than the surface grain; Also known as solid color or solid skin.

Not 2: Dönem “translucency” is defined as a tinted composition used on a wood surface to produce an even finish that does not completely obscure the grain or grain of the wood.

Not 3: Dönem “transparent” is defined as a transparent composition used on a wood surface to produce an even finish that does not obscure the grain or grain of the wood.

1.1.1 Discussion – When applied to wood of different colours, there is a colour difference between the stained substrates.

1.2 İnç ila pound cinsinden değerler standart değerler olarak kabul edilecektir. Parantez içinde verilen değerler SI birimlerinin matematiksel dönüşümleridir ve yalnızca referans amaçlıdır ve standart olarak kabul edilmez..

1.3 This standard may address hazardous materials, operasyonlar ve ekipmanlar. Bu standardın tüm güvenlik konularını ele alması amaçlanmamıştır., varsa, kullanımıyla ilgili. Users of this standard are responsible for establishing appropriate safety and health practices and for determining the applicability of regulatory requirements prior to use.